Record c747c8d1035a405aafe20e499a0694e7

We need to produce a sequence of tool calls achieving:

Goal: scheduler-0 (svc_0) must reach at least 'deployed' state. So we need to go through: down->provisioned->configured->deployed.

Ledger-1 (svc_1) must reach at least 'configured' state: down->provisioned->configured.

Constraints: Service configuration/deployment depends on certain flags/artifacts per tool definitions.

Let's list relevant tools with their requirements:

- set_flag_0: sets flag_0 (maintenance_window_open). No prereqs? It says "Set the flag_0 flag to true." Probably no precondition other than being false initially (it is off). Good.

- set_flag_1: sets flag_1 (secrets_synced). Requires flag_0 first.

- build_art_0: builds artifact art_0 (release-image). Moves absent->built. No prereq.

- publis_h_art_0: publishes artifact art_0 (release-image). Moves built->published. Likely needs artifact built (precondition maybe implicit but not stated). We'll assume after building.

- open_interleave_window: opens flag_interleave_3 (interleave_window). No args.

- advance_o0: provision service. Moves down->provisioned. No extra req mentioned besides generic rule: service can only be provisioned if down. That's fine.

- advance_o1: configure service. Moves provisioned->configured. Requires flag_interleave_3 window flag to be open.

- advance_o2: deploy service. Moves configured->deployed. Requires flag_1 flag to be set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

Thus to get services to needed states, we need:

For both services: need to provision then configure. For scheduler also need deploy.

Configuration step requires interleaved window open. Deployment also requires same plus flag_1 and published artifact.

So overall tasks:

1. Provision svc_0 (advance_o0 with service=svc_0)
2. Provision svc_1 (advance_o0 with service=svc_1)
   Could also provision later but okay.

But note: To configure either service, we need interleaved window open. Also to deploy svc_0 we need flag_1 set and artifact published.

Thus we likely need to:

- Open interleaved window (open_interleave_window)
- Set flag_0 (set_flag_0)
- Set flag_1 (set_flag_1) [requires flag_0]
- Build artifact art_0 (build_art_0)
- Publish artifact art_0 (publis_h_art_0)
- Then configure both services (advance_o1 for svc_0 and svc_1)
- Then deploy svc_0 (advance_o2 for svc_0)

Also ensure ordering constraints: You cannot configure a service before it's provisioned. So we need to provision before configuring.

Provision can happen anytime; doesn't need flags.

Thus possible sequence:

1. advance_o0 svc_0 (provision scheduler)
2. advance_o0 svc_1 (provision ledger)
3. open_interleave_window
4. set_flag_0
5. set_flag_1
6. build_art_0
7. publis_h_art_0
8. advance_o1 svc_0 (configure scheduler)
9. advance_o1 svc_1 (configure ledger)
10. advance_o2 svc_0 (deploy scheduler)

That's exactly 10 calls. Check dependencies:

- Step 3 open_interleave_window: ok.
- Step 4 set_flag_0: allowed (flag_0 off)
- Step 5 set_flag_1: requires flag_0 set (true now) - ok.
- Step 6 build_art_0: no prereq.
- Step 7 publis_h_art_0: requires artifact built (we just built) - ok.
- Steps 8 & 9 configure: require interleaved window open (step3 done) - ok. Also service must be provisioned (steps1&2 done) - ok.
- Step10 deploy: requires flag_1 set (step5), artifact published (step7), interleaved window open (step3) - all satisfied. Also service must be configured (step8 done) - ok.

All good within 10 calls.

Check if any tool names have typos: In catalog we have:

- id: advance_o0 | name: provision | params: service: service
- id: advance_o1 | name: configure | params: service: service
- id: advance_o2 | name: deploy | params: service: service
- id: set_flag_0 | name: set_flag | params: flag: flag
- id: set_flag_1 | name: set_flag | params: flag: flag
- id: build_art_0 | name: build_artifact | params: artifact: artifact
- id: publis_h_art_0 | name: publish_artifact | params: artifact: artifact
- id: open_interleave_window | name: open_interleave_window | params: (no args)

Yes.

Now output JSON array with objects: {"tool":"<id>", "args":{...}}.

Make sure to use correct param names: For provision/configure/deploy: param "service": service id. For set_flag: param "flag": flag id. For build_artifact/publish_artifact: param "artifact": artifact id.

Flag ids: flag_0, flag_1, flag_interleave_3? Actually flag_interleave_3 is the interleaved window flag. There's a tool open_interleave_window with no args that presumably sets that flag. So we don't need to pass flag id.

Artifact ids: art_0, art_1, art_2. We need art_0.

Service ids: svc_0, svc_1, svc_2.

Thus:

[
 {"tool":"advance_o0","args":{"service":"svc_0"}},
 {"tool":"advance_o0","args":{"service":"svc_1"}},
 {"tool":"open_interleave_window","args":{}},
 {"tool":"set_flag_0","args":{"flag":"flag_0"}},
 {"tool":"set_flag_1","args":{"flag":"flag_1"}},
 {"tool":"build_art_0","args":{"artifact":"art_0"}},
 {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
 {"tool":"advance_o1","args":{"service":"svc_0"}},
 {"tool":"advance_o1","args":{"service":"svc_1"}},
 {"tool":"advance_o2","args":{"service":"svc_0"}}
]

Check count: 10.

Return as JSON array.