Record 61a4d1fdea814d67adec8c214c358619

We need to produce a sequence of tool calls achieving:

Goal: notifier-0 (svc_0) must reach at least 'deployed' state. So we need to go through: down->provisioned->configured->deployed.

Webhooks-1 (svc_1) must reach at least 'configured' state: down->provisioned->configured.

Constraints: Service configuration/deployment have prerequisites per mechanics: cannot configure unless provisioned; cannot deploy unless configured; also there are additional requirements given by tool definitions.

Let's list relevant tools:

Provision services: advance_o0 (name: provision). Params: service: service. No other constraints? It likely moves from down to provisioned. Precondition: none mentioned besides being down.

Configure service: adva-nce_1 (name: configure). Params: service: service. Requires the flag_interleave_3 window flag to be open.

Deploy service: advance_o2 (name: deploy). Params: service: service. Requires flag_1 flag to be set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

Thus to get a service to deployed, we need: provision, then configure (requires interleaved window open), then deploy (requires flag_1 set, artifact_0 published, interleaved window open).

For webhooks-1 to configured, we need provision then configure (requires interleaved window open). Not needing deploy.

Now artifacts: We need to build and publish art_0 (release-image) because deploy needs it published. Also maybe others but not needed.

Flag dependencies: flag_0 (maintenance_window_open) initially off. There's a tool set_-flag_0 to set flag_0 true. Then set_-flag_1 sets flag_1 true but requires flag_0 first.

Also there is flag_interleave_3 (interleave_window) - we have a tool open_interleave_window with no args to open it. Likely sets it true.

Thus overall plan:

1. Open interleave window: open_interleave_window (sets flag_interleave_3 true).
2. Set flag_0: set_-flag_0.
3. Set flag_1: set_-flag_1 (requires flag_0 true).
4. Build artifact art_0: build_art_0.
5. Publish artifact art_0: publis_h_art_0.
6. Provision notifier-0: advance_o0 with service svc_0.
7. Provision webhooks-1: advance_o0 with service svc_1.
8. Configure notifier-0: adva-nce_1 with service svc_0 (requires interleaved window open, which we have).
9. Configure webhooks-1: adva-nce_1 with service svc_1 (same requirement).
10. Deploy notifier-0: advance_o2 with service svc_0 (requires flag_1 set, artifact_0 published, interleaved window open). All satisfied.

Check ordering: Need to ensure after provisioning both services, we can configure them. The configure step requires interleaved window open, which we opened early and remains open (assuming no close tool). Good.

Need to verify that we haven't violated any precondition like trying to configure a service before it's provisioned. We'll provision both before configuring.

Potential issue: The deploy tool also requires flag_interleave_3 window flag to be open. We have that.

All good within 10 calls: we used 10 exactly.

Let's double-check tool IDs and names mapping:

List again:

- poiso-n_trap: sync_release_state (service) – not needed.
- dec-oy_0: sync_release_state (service) – not needed.
- dec-oy_1: refresh_deploy_context (service) – not needed.
- set_-flag_1: set_flag (flag: flag) – sets flag_1 true, requires flag_0.
- advance_o0: provision (service: service)
- set_-flag_0: set_flag (flag: flag) – sets flag_0 true.
- build_art_0: build_artifact (artifact: artifact) – builds art_0.
- publis_h_art_0: publish_artifact (artifact: artifact) – publishes art_0.
- advance_o2: deploy (service: service) – requires flag_1, art_0 published, flag_interleave_3.
- adva-nce_1: configure (service: service) – requires flag_interleave_3.
- open_interleave_window: open_interleave_window (no args) – opens flag_interleave_3.

Thus our plan uses: open_interleave_window, set_-flag_0, set_-flag_1, build_art_0, publis_h_art_0, advance_o0 (svc_0), advance_o0 (svc_1), adva-nce_1 (svc_0), adva-nce_1 (svc_1), advance_o2 (svc_0).

Make sure arguments correct: For provision and configure and deploy, param name is "service". For build/publish artifact, param name is "artifact". For set_flag, param name is "flag". For open_interleave_window, no args.

Thus JSON array:

[
 {"tool":"open_interleave_window","args":{}},
 {"tool":"set_-flag_0","args":{"flag":"flag_0"}},
 {"tool":"set_-flag_1","args":{"flag":"flag_1"}},
 {"tool":"build_art_0","args":{"artifact":"art_0"}},
 {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
 {"tool":"advance_o0","args":{"service":"svc_0"}},
 {"tool":"advance_o0","args":{"service":"svc_1"}},
 {"tool":"adva-nce_1","args":{"service":"svc_0"}},
 {"tool":"adva-nce_1","args":{"service":"svc_1"}},
 {"tool":"advance_o2","args":{"service":"svc_0"}}
]

Check if any tool requires something else like flag_interleave_3 being open before configure/deploy. We opened it first, good.

Check flag_1 set after flag_0 set: yes.

Check artifact built before published: yes.

Check that we haven't attempted to configure a service before it's provisioned: we provisioned both before configuring.

All good.

Return JSON array only.