Data to …… trials

Record 78184962e8c24c688fb3ff8f2cd5d41d

PASS

Verdict and provenance first; raw prompt/response/reasoning below, collapsed.

✓PASSanswered "]" · model Nemotron 3 Super 120B

finish_reason: stop · tokens in/out: 1033/1454 · cost: $0.000737 · latency: 9015.9 ms

tool_plantemplatestop

verifier_detail: kind=tool_plan;campaign=1;traps=poison_traps=1;dishonest_decoys_on=1;implicit_preconditions_on=1;zero_slack_on=1;id_collisions_on=1;detail=goal_reached;n_calls=10;optimal_depth=10;overhead=0

trap kind(s) this world was seeded for: poison_traps=1

lineage: 78184962

← prev trial · trial 53 of 56 · next trial →

Prompt 3,959 chars · 1,033 tokens in
You are an operations planner. Below is the current state of a small deployment environment, a goal, and a catalog of tools you may call. Each tool has typed parameters and PRECONDITIONS that must hold at the moment you call it; calling a tool whose preconditions are not met is an error and your plan fails.
ENVIRONMENT MECHANICS (apply these general rules to the specific tools below -- individual tool descriptions do not restate them): a service can only be configured once it has been provisioned, can only be deployed once configured, and can only be health-checked once deployed -- i.e. each rung of the down -> provisioned -> configured -> deployed -> healthy ladder requires the previous rung. An artifact can only be published once it has been built. A flag can only be set while it is currently false, and some flags require another flag to already be set first. Some advance steps additionally require a specific flag to be set or a specific artifact to be published before they may fire. Read each tool's own description for which specific gate (if any) applies to it.

CURRENT STATE:
- registry-0 is currently down (not yet provisioned).
- scheduler-1 is currently down (not yet provisioned).
- reporting-2 is currently down (not yet provisioned).
- The release-image artifact does not exist yet.
- The db-migration artifact does not exist yet.
- The config-bundle artifact does not exist yet.
- The maintenance_window_open flag is off.
- The secrets_synced flag is off.
- The feature_gate_on flag is off.

GOAL (all conditions must hold at the end):
- service 'registry-0' must reach at least the 'deployed' state
- service 'scheduler-1' must reach at least the 'configured' state

ENTITY IDS (use these exact ids in your tool args):
Services: svc_0 (registry-0), svc_1 (scheduler-1), svc_2 (reporting-2)
Artifacts: art_0 (release-image), art_1 (db-migration), art_2 (config-bundle)
Flags: flag_0 (maintenance_window_open), flag_1 (secrets_synced), flag_2 (feature_gate_on), flag_interleave_3 (interleave_window)

TOOL CATALOG:
- id: dec-oy_0 | name: sync_release_state | params: service: service
    Reconciles registry-0's deployment metadata before rollout.
- id: set_-flag_0 | name: set_flag | params: flag: flag
    Set the flag_0 flag to true.
- id: publis-h_art_0 | name: publish_artifact | params: artifact: artifact
    Publish the art_0 artifact (moves it from 'built' to 'published').
- id: dec-oy_1 | name: sync_release_state | params: service: service
    Reconciles registry-0's deployment metadata before rollout.
- id: poiso-n_trap | name: sync_release_state | params: service: service
    Reconcile registry-0's deployment metadata ahead of rollout.
- id: build-_art_0 | name: build_artifact | params: artifact: artifact
    Build the art_0 artifact (moves it from 'absent' to 'built').
- id: advance_o0 | name: provision | params: service: service
    Provision a service, moving it from 'down' to 'provisioned'.
- id: set_-flag_1 | name: set_flag | params: flag: flag
    Set the flag_1 flag to true. Requires the flag_0 flag first.
- id: advance_o2 | name: deploy | params: service: service
    Deploy a service, moving it from 'configured' to 'deployed'. Requires the flag_1 flag to be set. Requires the art_0 artifact to be published. Requires the flag_interleave_3 window flag to be open.
- id: adva-nce_1 | name: configure | params: service: service
    Configure a service, moving it from 'provisioned' to 'configured'. Requires the flag_interleave_3 window flag to be open.
- id: open_interleave_window | name: open_interleave_window | params: (no args)
    Open the shared interleave window flag.

Output ONLY a JSON array of tool calls that, executed in order from the current state, satisfies the goal. Each element must be an object {"tool": "<tool id>", "args": {"<param>": "<entity id>", ...}}. Do not include any prose, explanation, or markdown fences -- just the JSON array.

You may use at most 10 tool calls.
Response 1,454 tokens out · finish: stop

[
  {"tool": "open_interleave_window", "args": {}},
  {"tool": "set_-flag_0", "args": {"flag": "flag_0"}},
  {"tool": "set_-flag_1", "args": {"flag": "flag_1"}},
  {"tool": "build-_art_0", "args": {"artifact": "art_0"}},
  {"tool": "publis-h_art_0", "args": {"artifact": "art_0"}},
  {"tool": "advance_o0", "args": {"service": "svc_0"}},
  {"tool": "advance_o0", "args": {"service": "svc_1"}},
  {"tool": "adva-nce_1", "args": {"service": "svc_0"}},
  {"tool": "adva-nce_1", "args": {"service": "svc_1"}},
  {"tool": "advance_o2", "args": {"service": "svc_0"}}
]
Reasoning 4,381 chars
Model reasoning
We need to produce a sequence of tool calls achieving:

Goal: registry-0 (svc_0) must reach at least deployed state. Scheduler-1 (svc_1) must reach at least configured state.

Constraints: Service states progression: down -> provisioned -> configured -> deployed -> healthy (but we don't need healthy). So for svc_0 we need to go through provision, configure, deploy. For svc_1 we need provision, configure (at least).

Also note there are other constraints: configuration step requires flag_interleave_3 window flag to be open. Deployment step also requires flag_1 (secrets_synced) set, artifact art_0 published, and flag_interleave_3 open.

Thus we need to:

- Open interleaving window via open_interleave_window (sets flag_interleave_3? Actually tool opens the shared interleave window flag.)

- Then we can provision services using advance_o0 (provision). This moves from down to provisioned.

- Then configure services using adva-nce_1 (configure). Requires flag_interleave_3 open.

- For svc_0 after configure, we need deploy using advance_o2 (deploy). Requires flag_1 set, artifact art_0 published, and flag_interleave_3 open.

So we need to ensure flag_1 set (requires flag_0 first). Also need to build and publish artifact art_0.

Flag_0: set_flag with flag flag_0 (set_-flag_0). Flag_1: set_flag with flag flag_1 (set_-flag_1) requiring flag_0 first.

Artifact flow: build_artifact (build-_art_0) then publish_artifact (publis-h_art_0). There's no precondition on building aside from artifact absent initially.

Now check if any other dependencies: maybe some tools have duplicate IDs like dec-oy_0 etc but those seem irrelevant (sync_release_state). Not needed.

We need to respect max 10 calls.

Let's list required calls:

1. open_interleave_window (no args)
2. set_-flag_0 (flag: flag_0)
3. set_-flag_1 (flag: flag_1) [requires flag_0]
4. build-_art_0 (artifact: art_0)
5. publis-h_art_0 (artifact: art_0)
6. advance_o0 for svc_0 (service: svc_0) // provision registry-0
7. advance_o0 for svc_1 (service: svc_1) // provision scheduler-1
8. adva-nce_1 for svc_0 (service: svc_0) // configure registry-0
9. adva-nce_1 for svc_1 (service: svc_1) // configure scheduler-1
10. advance_o2 for svc_0 (service: svc_0) // deploy registry-0

That's exactly 10 calls. Need to verify ordering respects preconditions:

- After open_interleave_window, flag_interleave_3 is open.

- set_-flag_0 sets flag_0 true.

- set_-flag_1 requires flag_0 true => ok after step2.

- build-_art_0: artifact absent -> built.

- publis-h_art_0: artifact built -> published.

- advance_o0 provisions service from down to provisioned. No preconditions besides service being down (they are). It doesn't require any flags? The description didn't mention any. So okay.

- adva-nce_1 configure requires flag_interleave_3 open. We have that from step1, still open (no tool to close). Good.

- advance_o2 deploy requires flag_1 set, artifact art_0 published, and flag_interleave_3 open. After steps 2-5 we have flag_1 set, artifact published, flag_interleave_3 open. Good.

Potential nuance: The deploy tool might also require service to be configured already (since it moves from configured to deployed). Indeed we need to have configured svc_0 before deploying. Step8 configures svc_0, step10 deploys svc_0. Good.

Check that we haven't attempted to configure svc_1 after we provisioned it but before we maybe need something else? No.

All good.

Now output JSON array with objects: {"tool": "<tool id>", "args": {...}}.

Tool IDs as given:

- open_interleave_window: id: open_interleave_window

- set_-flag_0: id: set_-flag_0

- set_-flag_1: id: set_-flag_1

- build-_art_0: id: build-_art_0

- publis-h_art_0: id: publis-h_art_0

- advance_o0: id: advance_o0

- adva-nce_1: id: adva-nce_1

- advance_o2: id: advance_o2

Make sure to use exact strings.

Args: for set_flag tools, param "flag": flag id (flag_0, flag_1). For build/publish artifact: param "artifact": artifact id (art_0). For provision/configure/deploy: param "service": service id (svc_0, svc_1). For open_interleave_window: no args.

Thus produce array.

Let's double-check ordering: Could we combine provision for both services before configure? Yes.

Provision svc_0 then svc_1 (order doesn't matter). Then configure svc_0 then svc_1 (order doesn't matter). Then deploy svc_0.

All preconditions satisfied.

Now produce final answer.
Realized dims 8
dimvalue
catalog_size11.0
chain_length4.0
decoy_count2.0
irreversibility1.0
parallel_goals2.0
plan_overhead0.0
realized_plan_depth10.0
state_obscurity0.0
Latent params 6
paramvalue
decoy_tools2.0
irreversibility0.0
parallel_goals2.0
plan_depth3.0
precondition_chain2.0
state_obscurity0.0