Record 94847676ccb34e20b00e9acfadd99cb3

We need to produce a sequence of tool calls achieving:

Goal: registry-0 (svc_0) must reach at least 'deployed' state. So we need to go through states: down -> provisioned -> configured -> deployed.

Cache-1 (svc_1) must reach at least 'configured': so down->provisioned->configured.

Constraints: Service configuration/deployment depends on certain prerequisites per mechanics: For any service, cannot configure unless provisioned, cannot deploy unless configured, etc. Additionally there are extra requirements given by tool preconditions.

Let's examine each tool:

- set_flag_o0: sets flag_0 (maintenance_window_open). No precondition? It says "Set the flag_0 flag to true." Probably no requirement other than flag being false initially (which it is). We'll assume allowed if flag false.

- advance_o0: provision service. Moves from down to provisioned. Likely no additional constraints besides service being down.

- decoy_o1: confirm_service_target - likely doesn't change state but maybe checks something. Not needed.

- decoy_o0: refresh_deploy_context - also probably no effect.

- build_art_o0: builds artifact art_0 (release-image). From absent to built.

- set_flag_o1: set flag_1 (secrets_synced) to true. Requires flag_0 first.

- publis-h_art_0: publishes artifact art_0 (release-image). Moves from built to published.

- poiso-n_trap: sync_release_state with param service. Possibly some side-effect but unknown. Might be irrelevant.

- adva_nce_2: deploy service. Moves from configured to deployed. Precondition: requires flag_1 flag set, requires art_0 artifact published, requires flag_interleave_3 window flag open.

- adva-nce_1: configure service. Moves from provisioned to configured. Precondition: requires flag_interleave_3 window flag open.

- open_interleave_window: opens flag_interleave_3 (interleave_window). No args.

Thus to get services to desired states, we need to open interleaving window flag (flag_interleave_3) before configuring any service, because both configure and deploy require that flag open. Also deploy further requires flag_1 set and artifact published.

So overall plan:

1. Open interleave window: open_interleave_window (sets flag_interleave_3 true).

Now we can configure services after provisioning.

But note: To configure a service, we need it provisioned first. So we need to provision each service before configuring.

Provision tool: advance_o0 (provision). No preconditions beyond service being down.

Thus steps:

- Provision svc_0 (registry-0): advance_o0 with service svc_0.

- Provision svc_1 (cache-1): advance_o0 with service svc_1.

Now we have both provisioned.

Next, we need to configure both services (to meet goals: svc_0 needs deployed later, but at minimum configured then later deploy; svc_1 needs configured). Since configure requires interleave window open (already done). So we can configure svc_0 and svc_1 using adva-nce_1 (configure). Order doesn't matter.

After configuring svc_0, we still need to deploy it. Deploy requires flag_1 set, artifact published, and interleave window open (still open). So we need to:

- Set flag_0 (maintenance_window_open) via set_flag_o0.

- Then set flag_1 (secrets_synced) via set_flag_o1 (requires flag_0).

- Build artifact art_0 via build_art_o0.

- Publish artifact art_0 via publis-h_art_0.

Then we can deploy svc_0 via adva_nce_2 (deploy). Note: deploy also requires interleave window open (still true). Good.

Potentially we could also need to ensure that after deploying svc_0, its state is deployed (>= deployed). That meets goal.

Check ordering dependencies: Does configuring a service require anything else like flags? Only interleave window. So fine.

Does provisioning require anything? No.

Thus minimal steps list:

1. open_interleave_window

2. provision svc_0

3. provision svc_1

4. configure svc_0

5. configure svc_1

6. set_flag_o0 (flag_0)

7. set_flag_o1 (flag_1) [requires flag_0]

8. build_art_o0

9. publis-h_art_0

10. adva_nce_2 deploy svc_0

That's 10 steps exactly. Need to verify each tool's preconditions satisfied at point of call.

Let's simulate:

Initial state:

- All services down.

- Flags all false.

- Artifacts absent.

Step1: open_interleave_window. No args. Precondition? None mentioned. Should succeed. After: flag_interleave_3 = true.

Step2: provision svc_0 via advance_o0. Precondition: service down. Yes. After: svc_0 provisioned.

Step3: provision svc_1 via advance_o0. Precondition: service down. svc_1 down. After: svc_1 provisioned.

Step4: configure svc_0 via adva-nce_1. Precondition: requires flag_interleave_3 window flag open. It's true. Also service must be provisioned (implied by mechanics). It is provisioned. After: svc_0 configured.

Step5: configure svc_1 via adva-nce_1. Same precondition: flag_interleave_3 true, svc_1 provisioned. After: svc_1 configured.

Step6: set_flag_o0 (set flag_0). Precondition: flag_0 false. It's false. After: flag_0 true.

Step7: set_flag_o1 (set flag_1). Precondition: requires flag_0 set. flag_0 true. Also flag_1 false initially. After: flag_1 true.

Step8: build_art_o0 (build artifact art_0). Precondition: artifact absent. It's absent. After: art_0 built.

Step9: publis-h_art_0 (publish artifact art_0). Precondition: artifact built. It's built. After: art_0 published.

Step10: adva_nce_2 deploy svc_0. Precondition: requires flag_1 set (true), requires art_0 published (true), requires flag_interleave_3 window flag open (true). Also service must be configured (mechanics). svc_0 is configured. After: svc_0 deployed.

Goal: svc_0 at least deployed (yes). svc_1 at least configured (yes). Done.

All within 10 calls.

We should output JSON array with objects containing tool and args.

Tool IDs as given: open_interleave_window, advance_o0, adva-nce_1, set_flag_o0, set_flag_o1, build_art_o0, publis-h_art_0, adva_nce_2.

Note: The tool IDs have hyphens and underscores exactly as in catalog:

- open_interleave_window (id: open_interleave_window) name same.

- advance_o0 (id: advance_o0)

- adva-nce_1 (id: adva-nce_1) note hyphen between adva and nce? Actually catalog shows "adva-nce_1". Yes.

- set_flag_o0

- set_flag_o1

- build_art_o0

- publis-h_art_0 (note hyphen after publis? Actually "publis-h_art_0").

- adva_nce_2 (id: adva_nce_2)

Make sure to use correct IDs.

Args:

- open_interleave_window: no args => {}.

- advance_o0: service: svc_0 or svc_1.

- adva-nce_1: service: svc_0 or svc_1.

- set_flag_o0: flag: flag_0

- set_flag_o1: flag: flag_1

- build_art_o0: artifact: art_0

- publis-h_art_0: artifact: art_0

- adva_nce_2: service: svc_0

Double-check that flag IDs are exactly as given: flag_0 (maintenance_window_open), flag_1 (secrets_synced), flag_2 (feature_gate_on), flag_interleave_3 (interleave_window). So set_flag_o0 sets flag_0, set_flag_o1 sets flag_1.

Artifact IDs: art_0 (release-image), art_1 (db-migration), art_2 (config-bundle). So we use art_0.

Service IDs: svc_0 (registry-0), svc_1 (cache-1), svc_2 (webhooks-2). Use svc_0 and svc_1.

Now produce JSON array.

Order as above.

Let's craft:

[
  {"tool":"open_interleave_window","args":{}},
  {"tool":"advance_o0","args":{"service":"svc_0"}},
  {"tool":"advance_o0","args":{"service":"svc_1"}},
  {"tool":"adva-nce_1","args":{"service":"svc_0"}},
  {"tool":"adva-nce_1","args":{"service":"svc_1"}},
  {"tool":"set_flag_o0","args":{"flag":"flag_0"}},
  {"tool":"set_flag_o1","args":{"flag":"flag_1"}},
  {"tool":"build_art_o0","args":{"artifact":"art_0"}},
  {"tool":"publis-h_art_0","args":{"artifact":"art_0"}},
  {"tool":"adva_nce_2","args":{"service":"svc_0"}}
]

Check count: 10.

Return only JSON array.