Record a7944e353730405fa49286788af55b69

We need to produce a sequence of tool calls achieving:

Goal: gateway-0 (svc_0) must reach at least 'deployed' state. So we need to go through: down->provisioned->configured->deployed.

Auth-api-1 (svc_1) must reach at least 'configured' state: so down->provisioned->configured.

Constraints: services can only be configured after provisioned, etc.

Also there are other requirements: For deploying a service via adva_nce_2 (deploy) requires flag_1 set, artifact art_0 published, and flag_interleave_3 open.

For configuring a service via adva-nce_1 (configure) requires flag_interleave_3 open.

Provision via advance_o0 (provision) no extra prereqs? It doesn't list any besides being called on a service that is down.

Set flags: set_-flag_0 sets flag_0 true. set_flag_1 sets flag_1 true but requires flag_0 first.

Open interleaved window: open_interleave_window opens flag_interleave_3.

Build artifacts: build-_art_0 builds art_0. Then publish artifact: publis_h_art_0 publishes art_0.

There might also be other tools like stage_goal_gate, confirm_service_target, sync_release_state - maybe needed? Not sure if necessary. They seem like optional checks/gates but not required by mechanics. However they have preconditions perhaps requiring certain states. We'll see.

Goal: Need to get both services to required states with minimal steps <=10.

Let's outline steps:

1. Set flag_0 (set_-flag_0). This enables setting flag_1 later.

2. Open interleave window (open_interleave_window). Needed for configure and deploy.

3. Provision gateway-0 (advance_o0 on svc_0).

4. Provision auth-api-1 (advance_o0 on svc_1). Could do either order.

5. Configure gateway-0 (adva-nce_1 on svc_0) after provisioned and window open.

6. Configure auth-api-1 (adva-nce_1 on svc_1) similarly.

7. Build artifact art_0 (build-_art_0).

8. Publish artifact art_0 (publis_h_art_0).

9. Set flag_1 (set_flag_1) after flag_0 set.

Now we have flag_1 true, artifact published, window open. Now we can deploy gateway-0 (adva_nce_2 on svc_0). That will move it from configured to deployed.

Check if any additional constraints: deploy also requires flag_interleave_3 open (we have), flag_1 set (we will), artifact published (we will). Good.

Thus final state: gateway-0 deployed, auth-api-1 configured (we stopped at configured). Goal satisfied.

Count steps: Let's count:

1 set_-flag_0
2 open_interleave_window
3 advance_o0 svc_0
4 advance_o0 svc_1
5 adva-nce_1 svc_0
6 adva-nce_1 svc_1
7 build-_art_0
8 publis_h_art_0
9 set_flag_1
10 adva_nce_2 svc_0

Exactly 10 calls. Within limit.

Need to ensure preconditions for each:

- set_-flag_0: sets flag_0 true. Precondition? Probably none (just can set while false). Initially flag_0 off, ok.

- open_interleave_window: opens flag_interleave_3. No precondition.

- advance_o0 provision svc_0: service down -> provisioned. No extra prereqs.

- advance_o0 provision svc_1: same.

- adva-nce_1 configure svc_0: requires flag_interleave_3 open (true). Also service must be provisioned (we did). OK.

- adva-nce_1 configure svc_1: same.

- build-_art_0: builds artifact from absent to built. No prereqs.

- publis_h_art_0: publish artifact from built to published. Requires artifact built (we just built). OK.

- set_flag_1: set flag_1 true requires flag_0 set (we did). OK.

- adva_nce_2 deploy svc_0: requires flag_1 set (yes), artifact published (yes), flag_interleave_3 open (yes). Also service must be configured (we configured). OK.

All good.

Potential nuance: The tool names have weird formatting with underscores and hyphens. Must match exactly as given in catalog.

List:

- set_-flag_0 (id: set_-flag_0) name: set_flag, params: flag: flag. So args: {"flag": "flag_0"}? Actually flag param expects a flag entity id. The flags are defined: flag_0 (maintenance_window_open), flag_1 (secrets_synced), flag_2 (feature_gate_on), flag_interleave_3 (interleave_window). So we need to pass flag: "flag_0". Similarly set_flag_1 expects flag: "flag_1".

- open_interleave_window: no args.

- advance_o0: params service: service. So args {"service": "svc_0"} etc.

- adva-nce_1: params service: service. Args {"service": "svc_0"} etc.

- build-_art_0: params artifact: artifact. Args {"artifact": "art_0"}.

- publis_h_art_0: params artifact: artifact. Args {"artifact": "art_0"}.

- set_flag_1: params flag: flag. Args {"flag": "flag_1"}.

- adva_nce_2: params service: service. Args {"service": "svc_0"}.

Check spelling: The tool IDs have hyphens and underscores. Ensure we copy exactly.

List again from catalog:

- id: set_-flag_0 | name: set_flag | params: flag: flag
- id: set_flag_1 | name: set_flag | params: flag: flag
- id: build-_art_0 | name: build_artifact | params: artifact: artifact
- id: publis_h_art_0 | name: publish_artifact | params: artifact: artifact
- id: advance_o0 | name: provision | params: service: service
- id: adva-nce_1 | name: configure | params: service: service
- id: adva_nce_2 | name: deploy | params: service: service
- id: open_interleave_window | name: open_interleave_window | params: (no args)

Yes.

Now produce JSON array.

Order as above.

Make sure each object: {"tool": "<tool id>", "args": {...}}.

Let's craft.

Step1: {"tool": "set_-flag_0", "args": {"flag": "flag_0"}}

Step2: {"tool": "open_interleave_window", "args": {}}

Step3: {"tool": "advance_o0", "args": {"service": "svc_0"}}

Step4: {"tool": "advance_o0", "args": {"service": "svc_1"}}

Step5: {"tool": "adva-nce_1", "args": {"service": "svc_0"}}

Step6: {"tool": "adva-nce_1", "args": {"service": "svc_1"}}

Step7: {"tool": "build-_art_0", "args": {"artifact": "art_0"}}

Step8: {"tool": "publis_h_art_0", "args": {"artifact": "art_0"}}

Step9: {"tool": "set_flag_1", "args": {"flag": "flag_1"}}

Step10: {"tool": "adva_nce_2", "args": {"service": "svc_0"}}

Return as JSON array.

Check length: 10.

Now output only JSON.