Record 35324f966dae4a5483c3923f4e72346b

We need to produce a sequence of tool calls achieving:

Goal: ledger-0 (svc_0) must reach at least 'deployed' state. So we need to go through: down->provisioned->configured->deployed.

Ledger-1 (svc_1) must reach at least 'configured' state: so down->provisioned->configured.

Constraints: We have certain tools with preconditions.

Let's list all tools:

- poison_trapo0: sync_release_state, param service: service. No precondition described? It says "Reconcile ledger-0's deployment metadata ahead of rollout." Likely no special requirement beyond maybe being called on service? Not sure if there are hidden prerequisites like needing something else. But given generic mechanics, this tool likely doesn't affect states but might be needed as part of process? However we don't see any explicit effect on service state. Might be irrelevant but could be used arbitrarily. Probably safe to ignore unless required by other constraints.

- decoy_o0: stage_goal_gate, param service: service. Also unknown effect.

- publis-h_art_0: publish_artifact, param artifact: artifact. Moves artifact from 'built' to 'published'.

- dec-oy_1: sync_release_state, param service: service. Another similar.

- build_art_0: build_artifact, param artifact: artifact. Moves artifact from absent to built.

- set_flag_o0: set_flag, param flag: flag. Sets flag_0 (maintenance_window_open) to true.

- set_flag_1: set_flag, param flag: flag. Sets flag_1 (secrets_synced) to true. Requires flag_0 first.

- adva_nce_0: provision, param service: service. Provisions service from down to provisioned.

- advance_o2: deploy, param service: service. Deploys service from configured to deployed. Requires flag_1 set, requires art_0 artifact published, requires flag_interleave_3 window flag open.

- adva-nce_1: configure, param service: service. Configures service from provisioned to configured. Requires flag_interleave_3 window flag open.

- open_interleave_window: opens shared interleave window flag (flag_interleave_3). No args.

Thus to get services to configured/deployed we need interleaving window open.

Also deploy requires flag_1 (secrets_synced) and art_0 published.

So we need to:

- Build artifact art_0 then publish it.

- Set flag_0 then flag_1.

- Open interleave window.

- Provision both services.

- Configure both services (requires interleave window open).

- Deploy ledger-0 (requires flag_1, art_0 published, interleave window open). Since after configuring we will have interleave window still open? Opening flag likely sets it true and stays true unless we close? There's no close tool. So fine.

Now also note that we have two sync_release_state tools (poison_trapo0 and dec-oy_1) and stage_goal_gate (decoy_o0). They might be unnecessary but we could include them if needed? Not required for state changes. Possibly they have hidden preconditions like requiring something else? The description: "Reconcile ledger-0's deployment metadata ahead of rollout." and "Stages the gating condition ledger-0 needs to reach the goal." Could be needed before deploying? But not stated as precondition. Usually they'd be just extra steps that don't affect state but could be called anytime. Since we have limit of 10 calls, we can avoid them.

We need to ensure we call tools in correct order respecting preconditions.

Let's outline steps:

1. build_art_0 (artifact: art_0) -> builds release-image.

2. publis-h_art_0 (artifact: art_0) -> publishes.

3. set_flag_o0 (flag: flag_0) -> opens maintenance_window_open.

4. set_flag_1 (flag: flag_1) -> requires flag_0 set, ok.

5. open_interleave_window -> opens flag_interleave_3.

6. adva_nce_0 (service: svc_0) -> provisions ledger-0.

7. adva_nce_0 (service: svc_1) -> provisions ledger-1.

8. adva-nce_1 (service: svc_0) -> configure ledger-0 (requires interleave window open).

9. adva-nce_1 (service: svc_1) -> configure ledger-1.

10. advance_o2 (service: svc_0) -> deploy ledger-0 (requires flag_1, art_0 published, interleave window open). All satisfied.

Now check counts: That's exactly 10 calls. Good.

But we need to verify each tool's preconditions:

- build_art_0: no preconditions mentioned besides artifact absent. Initially artifact absent, ok.

- publis-h_art_0: requires artifact built. After step1 it's built, ok.

- set_flag_o0: can set flag while currently false. flag_0 initially off, ok.

- set_flag_1: requires flag_0 already set. After step3 flag_0 set, ok.

- open_interleave_window: no preconditions.

- adva_nce_0 (provision): requires service down. Both services down initially. After provisioning svc_0, svc_0 becomes provisioned. Then provision svc_1 still down, ok.

- adva-nce_1 (configure): requires flag_interleave_3 window open AND service provisioned. After step5 window open. After step6 svc_0 provisioned, step7 svc_1 provisioned. So step8 configure svc_0 ok. Step9 configure svc_1 ok (still provisioned, window open).

- advance_o2 (deploy): requires flag_1 set, art_0 published, flag_interleave_3 window open, and service configured. After step4 flag_1 set, step2 artifact published, step5 window open, step8 svc_0 configured. So step10 deploy svc_0 ok.

Goal: ledger-0 deployed (yes), ledger-1 configured (yes). All good.

We used exactly 10 calls, within limit.

Now need to output JSON array with objects {"tool": "<tool id>", "args": {...}}.

Tool IDs as given:

- build_art_0: id "build_art_0"

- publis-h_art_0: id "publis-h_art_0" (note hyphen). Must match exactly.

- set_flag_o0: id "set_flag_o0"

- set_flag_1: id "set_flag_1"

- open_interleave_window: id "open_interleave_window"

- adva_nce_0: id "adva_nce_0"

- dec-oy_1 etc not used.

- adva-nce_1: id "adva-nce_1"

- advance_o2: id "advance_o2"

Check spelling: The tool list includes:

- adva_nce_0 (provision)

- advance_o2 (deploy)

- adva-nce_1 (configure)

Yes.

Now produce JSON array.

Order as above.

Let's craft:

[
  {"tool":"build_art_0","args":{"artifact":"art_0"}},
  {"tool":"publis-h_art_0","args":{"artifact":"art_0"}},
  {"tool":"set_flag_o0","args":{"flag":"flag_0"}},
  {"tool":"set_flag_1","args":{"flag":"flag_1"}},
  {"tool":"open_interleave_window","args":{}},
  {"tool":"adva_nce_0","args":{"service":"svc_0"}},
  {"tool":"adva_nce_0","args":{"service":"svc_1"}},
  {"tool":"adva-nce_1","args":{"service":"svc_0"}},
  {"tool":"adva-nce_1","args":{"service":"svc_1"}},
  {"tool":"advance_o2","args":{"service":"svc_0"}}
]

Make sure no trailing commas.

Return only JSON array.