Record 05f30db3b83944e79287621b3599928d

We need to produce a sequence of tool calls achieving:

Goal: ingest-0 (svc_0) must reach at least deployed state. So we need to go through: down->provisioned->configured->deployed.

Registry-1 (svc_1) must reach at least configured state: so down->provisioned->configured.

Constraints: Service progression depends on certain prerequisites per tool definitions.

Let's list relevant tools:

- adva_nce_0: provision service (from down to provisioned). No extra requirements? It says "Provision a service, moving it from 'down' to 'provisioned'." Likely no other constraints besides being down.

- advance_o1: configure service (from provisioned to configured). Requires the flag_interleave_3 window flag to be open.

- adva_nce_2: deploy service (from configured to deployed). Requires flag_1 flag to be set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

Thus both configure and deploy need interleaved window open.

Also there is a tool open_interleave_window with no args to open the shared interleave window flag.

Flag dependencies:

- set_flag_0 sets flag_0 (maintenance_window_open) to true.

- set_flag_1 sets flag_1 (secrets_synced) to true, but requires flag_0 first.

So to get flag_1 set, we need to set flag_0 then set_flag_1.

Other flags: flag_2 (feature_gate_on) maybe used elsewhere? Not needed.

There is also flag_interleave_3 (interleave_window) presumably opened via open_interleave_window.

Now artifacts: We have three artifacts: release-image (art_0), db-migration (art_1), config-bundle (art_2).

Tools related to artifacts:

- build-_art_0: builds art_0 (release-image) from absent to built.

- publis-h_art_0: publishes art_0 (requires it to be built). Moves from built to published.

No explicit build/publish for others given. Might not need them.

Goal doesn't mention needing those artifacts except for deploy requiring art_0 published.

Thus we need to build and publish release-image.

Additionally, there might be other required steps like sync_release_state etc., but not necessary unless precondition.

Check if any tool requires something else: There's a tool named poiso-n_trap: sync_release_state param service. Possibly needed? But not mentioned as requirement for anything. Probably optional.

Decoy tools: decoy_o0 and decoy_o1 both stage_goal_gate for service. They seem irrelevant perhaps placeholders.

But note: The problem statement includes "Stages the gating condition ingest-0 needs to reach the goal." Maybe they are needed? Actually they say "Stages the gating condition ingest-0 needs to reach the goal." Could be a prerequisite for something else? However none of the real tools reference this staging. Perhaps they are dummy/no effect. Since they don't affect state, we could ignore them.

Given limit of max 10 calls, we should try minimal.

Sequence:

1. open_interleave_window (to allow configure/deploy later)
2. set_flag_0 (maintenance_window_open)
3. set_flag_1 (secrets_synced) [needs flag_0]
4. build-_art_0 (build release-image)
5. publis-h_art_0 (publish release-image)
6. adva_nce_0 on svc_0 (ingest-0) => provision
7. adva_nce_0 on svc_1 (registry-1) => provision
8. advance_o1 on svc_0 (configure) [needs interleave window open] - after step1 it's open.
9. advance_o1 on svc_1 (configure) [same]
10. adva_nce_2 on svc_0 (deploy) [needs flag_1 set, art_0 published, interleave window open]

That would be 10 calls exactly.

Check ordering: Need to ensure that when we run configure on svc_0 and svc_1, the services are provisioned. Steps 6 & 7 provision both. Then configure steps 8 & 9. Good.

Deploy step 10 uses svc_0 after it's configured (step8). Ensure flag_1 set (step3), art_0 published (step5), interleave window open (step1 still open). Yes.

Potential nuance: Does opening interleave window persist? Assume yes until closed; no close tool provided.

All good.

Need to output JSON array with objects: {"tool":"<tool id>", "args":{...}}.

Tool IDs exactly as given:

- open_interleave_window
- set_flag_0
- set_flag_1
- build-_art_0
- publis-h_art_0
- adva_nce_0
- advance_o1
- adva_nce_2

Note underscores/hyphens: Let's copy exactly.

List:

open_interleave_window (id: open_interleave_window)
set_flag_0 (id: set_flag_0)
set_flag_1 (id: set_flag_1)
build-_art_0 (id: build-_art_0)   // note hyphen after build?
publis-h_art_0 (id: publis-h_art_0) // hyphen after publis?
adva_nce_0 (id: adva_nce_0)
advance_o1 (id: advance_o1)
adva_nce_2 (id: adva_nce_2)

Make sure args keys match param names defined:

- open_interleave_window: no args => {}
- set_flag_0: params: flag: flag => need to pass flag identifier? The description: "Set the flag_0 flag to true." Parameter likely expects flag entity id: flag_0. So args: {"flag":"flag_0"}
- set_flag_1: args: {"flag":"flag_1"} (requires flag_0 set)
- build-_art_0: params: artifact: artifact => args: {"artifact":"art_0"}
- publis-h_art_0: args: {"artifact":"art_0"}
- adva_nce_0: params: service: service => args: {"service":"svc_0"} then later for svc_1.
- advance_o1: args: {"service":"svc_0"} then svc_1.
- adva_nce_2: args: {"service":"svc_0"}

Double-check that adva_nce_2 requires flag_1, art_0 published, flag_interleave_3 open. We have those.

Now verify that we haven't missed any precondition like needing flag_interleave_3 open for configure and deploy. We opened it at step1. No close.

Now check total calls: 9? Let's count:

1 open_interleave_window
2 set_flag_0
3 set_flag_1
4 build-_art_0
5 publis-h_art_0
6 adva_nce_0 svc_0
7 adva_nce_0 svc_1
8 advance_o1 svc_0
9 advance_o1 svc_1
10 adva_nce_2 svc_0

Yes 10.

Could we reduce? Maybe we could provision both services before configuring each individually; but we need configure for both. Already done.

Alternative: Could we configure registry-1 before ingest-0? Order doesn't matter.

Now ensure that after provisioning, we haven't violated any rule: service can only be configured once provisioned, etc. We provision then configure.

Now double-check that we didn't need to set flag_interleave_3 via some other tool besides open_interleave_window. That's the only tool to open it.

Now confirm that there is no tool requiring flag_2 or others.

Thus final answer: JSON array.

Let's construct.

Note: Must not include any extra text. Just JSON.

We'll output:

[
  {"tool":"open_interleave_window","args":{}},
  {"tool":"set_flag_0","args":{"flag":"flag_0"}},
  {"tool":"set_flag_1","args":{"flag":"flag_1"}},
  {"tool":"build-_art_0","args":{"artifact":"art_0"}},
  {"tool":"publis-h_art_0","args":{"artifact":"art_0"}},
  {"tool":"adva_nce_0","args":{"service":"svc_0"}},
  {"tool":"adva_nce_0","args":{"service":"svc_1"}},
  {"tool":"advance_o1","args":{"service":"svc_0"}},
  {"tool":"advance_o1","args":{"service":"svc_1"}},
  {"tool":"adva_nce_2","args":{"service":"svc_0"}}
]

Check formatting: Ensure no trailing commas.

Return.