Record 48096029bd714123869b5cb03503e688

We need to produce a sequence of tool calls achieving:

Goal: reporting-0 (svc_0) must reach at least 'deployed' state. So we need to go through states: down->provisioned->configured->deployed.

Search-1 (svc_1) must reach at least 'configured' state: down->provisioned->configured.

Thus both services need to be provisioned then configured; reporting also needs deployed after configuration.

Constraints: For each step there are preconditions per tool definitions.

Let's list all tools with their IDs and details:

From catalog:

- set_-flag_0 : name: set_flag ; param flag: flag . Sets flag_0 (maintenance_window_open). No prerequisites? It says "Set the flag_0 flag to true." Probably no precondition other than being false initially (it is off). Good.

- poiso-n_trap : name: sync_release_state ; param service: service . Description: "Reconcile reporting-0's deployment metadata ahead of rollout." Not sure about preconditions but likely none except maybe something else? We'll see later.

- build_art_o0 : name: build_artifact ; param artifact: artifact . Builds art_0 (release-image).

- dec-oy_1 : name: sync_release_state ; param service: service . "Reconciles reporting-0's deployment metadata before rollout."

- decoy_o0 : name: refresh_deploy_context ; param service: service . "Refreshes reporting-0's deploy context ahead of the goal check."

- advance_o0 : name: provision ; param service: service . Provisions a service, moving from down to provisioned.

- publish_art_o0 : name: publish_artifact ; param artifact: artifact . Publishes art_0 (from built to published).

- set_flag_1 : name: set_flag ; param flag: flag . Sets flag_1 (secrets_synced) to true. Requires flag_0 first.

- adva-nce_2 : name: deploy ; param service: service . Deploys a service, moving from configured to deployed. Requires flag_1 flag to be set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

- adva-nce_1 : name: configure ; param service: service . Configures a service, moving from provisioned to configured. Requires flag_interleave_3 window flag to be open.

- open_interleave_window : name: open_interleave_window ; params: none . Opens the shared interleave window flag (flag_interleave_3 presumably). This sets flag_interleave_3 to true.

Also note there might be additional constraints like artifacts needed for certain steps: e.g., deploy requires art_0 published. Also perhaps configure doesn't need anything else besides interleaving window.

Now initial state: All services down, artifacts absent, flags off.

Goal: Need to get svc_0 to deployed, svc_1 to configured.

Plan approach:

First, we need to open interleaved window because many steps require it: configure (adva-nce_1) and deploy (adva-nce_2) require flag_interleave_3 open. So we should run open_interleave_window early.

Then we need to provision services: using advance_o0 (provision) on each service.

Provision moves from down to provisioned. There's no extra condition listed for provision aside from generic rule: service can only be provisioned if down (which holds). So we can call advance_o0 twice: one for svc_0, one for svc_1.

After provision, we need to configure each service: using adva-nce_1 (configure) requiring interleaved window open (we have opened). So we can configure svc_0 and svc_1.

But wait: To configure svc_0 we need it provisioned first. After provision, yes.

Similarly for svc_1.

Now after configuring svc_0, we need to deploy it: using adva-nce_2 (deploy) requiring flag_1 set, art_0 published, and interleaved window open.

So we need to set flag_1 (requires flag_0 first). And we need to build and publish art_0.

Flag_0 is maintenance_window_open. We need to set flag_0 via set_-flag_0.

Sequence:

1. open_interleave_window (to satisfy configure/deploy requirements)
2. set_-flag_0 (set maintenance_window_open)
3. set_flag_1 (set secrets_synced) - requires flag_0 now true.
4. build_art_o0 (build release-image)
5. publish_art_o0 (publish release-image)
6. advance_o0 (provision svc_0)
7. advance_o0 (provision svc_1)   // could be any order
8. adva-nce_1 (configure svc_0)
9. adva-nce_1 (configure svc_1)
10. adva-nce_2 (deploy svc_0)

Check counts: That's exactly 10 calls.

Need to ensure each tool's preconditions satisfied at time of call.

Let's verify each step.

Initial state: all services down, artifacts absent, flags off, interleaved window closed.

Step1: open_interleave_window. Precondition? None described. Should succeed, setting flag_interleave_3 true.

State after step1: flag_interleave_3 = true.

Step2: set_-flag_0. Precondition: flag_0 currently false (yes). No other dependencies. Succeeds => flag_0 true.

Step3: set_flag_1. Precondition: requires flag_0 flag first. Now flag_0 true, so ok. Also flag_1 currently false. Succeeds => flag_1 true.

Step4: build_art_o0. Build artifact art_0. Precondition: artifact absent (yes). No other deps. Succeeds => art_0 built.

Step5: publish_art_o0. Publish artifact art_0. Precondition: artifact must be built (yes). Succeeds => art_0 published.

Step6: advance_o0 provision svc_0. Precondition: service down (yes). No other deps mentioned. Succeeds => svc_0 provisioned.

Step7: advance_o0 provision svc_1. Precondition: service down (yes). Succeeds => svc_1 provisioned.

Step8: adva-nce_1 configure svc_0. Precondition: requires flag_interleave_3 window flag to be open. It's true. Also service must be provisioned (yes). No other deps. Succeeds => svc_0 configured.

Step9: adva-nce_1 configure svc_1. Same preconditions: interleaved window open, service provisioned (yes). Succeeds => svc_1 configured.

Step10: adva-nce_2 deploy svc_0. Preconditions: requires flag_1 set (true), requires art_0 published (true), requires flag_interleave_3 window flag open (true). Also service must be configured (yes). Succeeds => svc_0 deployed.

Goal satisfied: svc_0 deployed (>= deployed), svc_1 configured (>= configured). Good.

All within 10 calls.

Potential nuance: Are there any other hidden preconditions like needing to run sync_release_state or refresh_deploy_context etc? Those appear as decoy tools possibly not needed. They may be irrelevant. Since we didn't use them, fine.

Check naming of tools: The IDs given in catalog contain hyphens and underscores etc. Must use exactly as given.

List:

- open_interleave_window (id: open_interleave_window)
- set_-flag_0 (id: set_-flag_0) Note: includes a dash before underscore? Actually "set_-flag_0". We'll need to use that exact string.

- set_flag_1 (id: set_flag_1)

- build_art_o0 (id: build_art_o0)

- publish_art_o0 (id: publish_art_o0)

- advance_o0 (id: advance_o0) used twice.

- adva-nce_1 (id: adva-nce_1) note hyphen between adva and nce? Actually "adva-nce_1". Use exactly.

- adva-nce_2 (id: adva-nce_2)

Make sure to use correct IDs.

Now construct JSON array with objects: {"tool": "<tool id>", "args": {"<param>": "<entity id>"}}.

Parameters:

For set_-flag_0: param "flag": expects a flag entity id? The description: "Set the flag_0 flag to true." Parameter: flag: flag. Likely we need to pass flag identifier: flag_0? But the tool is specifically for flag_0. However the param expects a flag entity; we should pass "flag_0". Similarly set_flag_1 expects flag: flag (probably flag_1). Let's check other set_flag tools: set_-flag_0 and set_flag_1 both have param flag: flag. So we need to specify which flag. Likely the flag entity id: flag_0 for set_-flag_0, flag_1 for set_flag_1.

For build_art_o0: param artifact: artifact. Should pass "art_0".

publish_art_o0: same.

advance_o0: param service: service. Pass svc_0 or svc_1.

adva-nce_1: param service: service. Pass svc_0 or svc_1.

adva-nce_2: param service: service. Pass svc_0.

open_interleave_window: no args.

sync_release_state etc not used.

Thus final JSON:

[
  {"tool":"open_interleave_window","args":{}},
  {"tool":"set_-flag_0","args":{"flag":"flag_0"}},
  {"tool":"set_flag_1","args":{"flag":"flag_1"}},
  {"tool":"build_art_o0","args":{"artifact":"art_0"}},
  {"tool":"publish_art_o0","args":{"artifact":"art_0"}},
  {"tool":"advance_o0","args":{"service":"svc_0"}},
  {"tool":"advance_o0","args":{"service":"svc_1"}},
  {"tool":"adva-nce_1","args":{"service":"svc_0"}},
  {"tool":"adva-nce_1","args":{"service":"svc_1"}},
  {"tool":"adva-nce_2","args":{"service":"svc_0"}}
]

Check ordering: after setting flag_0 and flag_1, we built and published artifact. Good.

Now double-check that any tool requires something else like flag_interleave_3 for configure and deploy: we opened it first, good.

One more nuance: The tool adva-nce_2 (deploy) also requires flag_interleave_3 window flag to be open. Already open.

All good.

Return only JSON array.