Record ffacb85a84ae48d9bb8355060d062393

PASS

Verdict and provenance first; raw prompt/response/reasoning below, collapsed.

✓PASSanswered "]" · model Nemotron 3 Super 120B

finish_reason: stop · tokens in/out: 960/1390 · cost: $0.000702 · latency: 9984.1 ms

tool_plantemplatestop

verifier_detail: kind=tool_plan;campaign=1;traps=poison_traps=1;dishonest_decoys_on=1;implicit_preconditions_on=1;zero_slack_on=1;id_collisions_on=1;detail=goal_reached;n_calls=9;optimal_depth=9;overhead=0

trap kind(s) this world was seeded for: poison_traps=1

lineage: ffacb85a

← prev trial · trial 32 of 56 · next trial →

Prompt 3,704 chars · 960 tokens in

You are an operations planner. Below is the current state of a small deployment environment, a goal, and a catalog of tools you may call. Each tool has typed parameters and PRECONDITIONS that must hold at the moment you call it; calling a tool whose preconditions are not met is an error and your plan fails.
ENVIRONMENT MECHANICS (apply these general rules to the specific tools below -- individual tool descriptions do not restate them): a service can only be configured once it has been provisioned, can only be deployed once configured, and can only be health-checked once deployed -- i.e. each rung of the down -> provisioned -> configured -> deployed -> healthy ladder requires the previous rung. An artifact can only be published once it has been built. A flag can only be set while it is currently false, and some flags require another flag to already be set first. Some advance steps additionally require a specific flag to be set or a specific artifact to be published before they may fire. Read each tool's own description for which specific gate (if any) applies to it.

CURRENT STATE:
- scheduler-0 is currently down (not yet provisioned).
- auth-api-1 is currently down (not yet provisioned).
- registry-2 is currently down (not yet provisioned).
- The release-image artifact does not exist yet.
- The db-migration artifact does not exist yet.
- The maintenance_window_open flag is off.
- The secrets_synced flag is off.

GOAL (all conditions must hold at the end):
- service 'scheduler-0' must reach at least the 'deployed' state
- service 'auth-api-1' must reach at least the 'configured' state

ENTITY IDS (use these exact ids in your tool args):
Services: svc_0 (scheduler-0), svc_1 (auth-api-1), svc_2 (registry-2)
Artifacts: art_0 (release-image), art_1 (db-migration)
Flags: flag_0 (maintenance_window_open), flag_1 (secrets_synced), flag_interleave_2 (interleave_window)

TOOL CATALOG:
- id: decoy_o0 | name: sync_release_state | params: service: service
    Reconciles scheduler-0's deployment metadata before rollout.
- id: publis_h_art_0 | name: publish_artifact | params: artifact: artifact
    Publish the art_0 artifact (moves it from 'built' to 'published').
- id: adva_nce_0 | name: provision | params: service: service
    Provision a service, moving it from 'down' to 'provisioned'.
- id: set_flag_0 | name: set_flag | params: flag: flag
    Set the flag_0 flag to true.
- id: decoy_o1 | name: sync_release_state | params: service: service
    Reconciles scheduler-0's deployment metadata before rollout.
- id: build-_art_0 | name: build_artifact | params: artifact: artifact
    Build the art_0 artifact (moves it from 'absent' to 'built').
- id: poiso-n_trap | name: sync_release_state | params: service: service
    Reconcile scheduler-0's deployment metadata ahead of rollout.
- id: adva_nce_2 | name: deploy | params: service: service
    Deploy a service, moving it from 'configured' to 'deployed'. Requires the flag_0 flag to be set. Requires the art_0 artifact to be published. Requires the flag_interleave_2 window flag to be open.
- id: adva_nce_1 | name: configure | params: service: service
    Configure a service, moving it from 'provisioned' to 'configured'. Requires the flag_interleave_2 window flag to be open.
- id: open_interleave_window | name: open_interleave_window | params: (no args)
    Open the shared interleave window flag.

Output ONLY a JSON array of tool calls that, executed in order from the current state, satisfies the goal. Each element must be an object {"tool": "<tool id>", "args": {"<param>": "<entity id>", ...}}. Do not include any prose, explanation, or markdown fences -- just the JSON array.

You may use at most 9 tool calls.

Response 1,390 tokens out · finish: stop


[
  {"tool":"adva_nce_0","args":{"service":"svc_0"}},
  {"tool":"adva_nce_0","args":{"service":"svc_1"}},
  {"tool":"open_interleave_window","args":{}},
  {"tool":"set_flag_0","args":{"flag":"flag_0"}},
  {"tool":"build-_art_0","args":{"artifact":"art_0"}},
  {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
  {"tool":"adva_nce_1","args":{"service":"svc_0"}},
  {"tool":"adva_nce_1","args":{"service":"svc_1"}},
  {"tool":"adva_nce_2","args":{"service":"svc_0"}}
]

Reasoning 4,123 chars

Model reasoning

We need to produce a sequence of tool calls achieving:

Goal: scheduler-0 (svc_0) must reach at least 'deployed' state. So we need to go through states: down -> provisioned -> configured -> deployed. For deploying, there are requirements: deploy tool (adva_nce_2) requires flag_0 set, art_0 published, and flag_interleave_2 open.

Also config step (adva_nce_1) requires flag_interleave_2 open.

Provision step (adva_nce_0) no extra prereqs? It likely doesn't have special flags.

Thus we need to:

- Provision svc_0 via adva_nce_0.
- Then maybe also need to configure svc_0 using adva_nce_1 (requires interleaving window open). But note: To get to deployed, we need configuration then deployment. However requirement says scheduler-0 must reach at least deployed; so we could skip configuring if we directly deploy? No, because per mechanics: cannot deploy unless configured. Actually rule: service can only be deployed once configured. So we need to configure as well.

Thus path: provision -> configure -> deploy.

For auth-api-1 (svc_1) must reach at least configured state. So we need to provision then configure (or possibly just provision+configure). We don't need to deploy it.

So tasks:

- Provision svc_0 (adva_nce_0)
- Provision svc_1 (adva_nce_0 with service=svc_1)
- Need to open interleaving window flag (open_interleave_window) to allow configure and deploy steps requiring it.
- Also need flag_0 set (set_flag_0) for deploy.
- Need to build and publish artifact art_0 (release-image) for deploy.
   Steps: build_artifact (build-_art_0) then publish_artifact (publis_h_art_0).

Note: There are duplicate tool IDs like decoy_o0 etc but irrelevant.

Now check dependencies: configure requires interleaving window open. So after opening window, we can configure both services.

Deploy requires flag_0 set, art_0 published, and interleaving window open.

Thus ordering:

1. Provision svc_0 (adva_nce_0)
2. Provision svc_1 (adva_nce_0)
3. Open interleaving window (open_interleave_window)
4. Set flag_0 (set_flag_0)
5. Build artifact art_0 (build-_art_0)
6. Publish artifact art_0 (publis_h_art_0)
7. Configure svc_0 (adva_nce_1)
8. Configure svc_1 (adva_nce_1)
9. Deploy svc_0 (adva_nce_2)

That's exactly 9 calls, within limit.

Check precondition details:

- adva_nce_0 (provision): no extra prereqs besides service being down. Both services start down, okay.

- open_interleave_window: opens flag_interleave_2. No prereqs.

- set_flag_0: sets flag_0 to true. Precondition: flag can only be set while it is currently false. Initially flag_0 off, ok.

- build-_art_0: builds artifact from absent to built. No prereqs.

- publis_h_art_0: publishes artifact from built to published. Requires artifact built (which we will have after build). Good.

- adva_nce_1 (configure): requires flag_interleave_2 open. After step 3 it's open. Service must be provisioned. We'll have provisioned both svc_0 and svc_1 by steps 1-2. Good.

- adva_nce_2 (deploy): requires flag_0 set, art_0 published, flag_interleave_2 open. After steps 4,5,6,3 we have all. Service must be configured. We'll configure svc_0 at step 7 before deploy step 9. Good.

Thus sequence works.

Need to output JSON array with objects: {"tool":"<tool id>", "args":{...}}.

Tool IDs exactly as given:

- adva_nce_0 (provision)
- adva_nce_0 again for svc_1
- open_interleave_window
- set_flag_0
- build-_art_0
- publis_h_art_0
- adva_nce_1 (configure) for svc_0
- adva_nce_1 for svc_1
- adva_nce_2 (deploy) for svc_0

Make sure args keys match param names: service: service, artifact: artifact, flag: flag, (no args) for open_interleave_window.

Thus:

[
 {"tool":"adva_nce_0","args":{"service":"svc_0"}},
 {"tool":"adva_nce_0","args":{"service":"svc_1"}},
 {"tool":"open_interleave_window","args":{}},
 {"tool":"set_flag_0","args":{"flag":"flag_0"}},
 {"tool":"build-_art_0","args":{"artifact":"art_0"}},
 {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
 {"tool":"adva_nce_1","args":{"service":"svc_0"}},
 {"tool":"adva_nce_1","args":{"service":"svc_1"}},
 {"tool":"adva_nce_2","args":{"service":"svc_0"}}
]

Check length 9.

Return only JSON array.

Realized dims 8

dim	value
catalog_size	10.0
chain_length	3.0
decoy_count	2.0
irreversibility	1.0
parallel_goals	2.0
plan_overhead	0.0
realized_plan_depth	9.0
state_obscurity	0.0

Latent params 6

param	value
decoy_tools	2.0
irreversibility	0.0
parallel_goals	2.0
plan_depth	3.0
precondition_chain	1.0
state_obscurity	0.0