Record 9166f7c34be24e31802d2d1696b4084f

We need to produce a sequence of tool calls achieving:

Goal: notifier-0 (svc_0) must reach at least deployed state. So we need to go through down->provisioned->configured->deployed.

Ingest-1 (svc_1) must reach at least configured state: so down->provisioned->configured.

Constraints: Service progression depends on prerequisites per mechanics: cannot configure unless provisioned; cannot deploy unless configured; also there are additional requirements: For configure step (advance_o1) requires flag_interleave_2 window flag to be open. For deploy step (adva-nce_2) requires flag_0 flag set, artifact art_0 published, and flag_interleave_2 window flag open.

Also note other constraints: Artifact publishing requires building first. There's no direct requirement about artifacts for services except deploy uses art_0.

Flag setting: set_flag_o0 sets flag_0 (maintenance_window_open). It can only be set while currently false. Initially flag_0 is off (false). So we can set it.

There is also flag_interleave_2 (interleave_window) initially? Not mentioned in CURRENT STATE list. Only listed flags: maintenance_window_open flag is off; secrets_synced flag is off. No mention of interleave_window flag. Likely default is closed/off. We have a tool open_interleave_window with no args to open that flag. Probably sets it true/open.

Thus we need to open interleaving window before configuring any service and before deploying.

Now let's outline needed steps:

For both services, we need to provision then configure. Additionally for svc_0 we need deploy after configure.

Provision tool: adva-nce_0 (provision) takes service param.

Configure tool: advance_o1 (configure) takes service param, requires flag_interleave_2 open.

Deploy tool: adva-nce_2 (deploy) takes service param, requires flag_0 set, art_0 published, flag_interleave_2 open.

Additionally we need to build and publish artifact art_0 before deploy.

Build artifact: build-_art_0 (build_artifact) takes artifact param (art_0). Moves from absent to built.

Publish artifact: publish_art_o0 (publish_artifact) takes artifact param (art_0). Moves from built to published. Precondition: artifact must be built (i.e., after build).

Set flag: set_flag_o0 sets flag_0.

Open interleaving window: open_interleave_window (no args) opens flag_interleave_2.

Potential extra tools: verify_goal_readiness (dec_oy_0) confirms notifier-0 is ready to satisfy goal; stage_goal_gate (dec-oy_1) stages gating condition notifier-0 needs to reach goal. These might be optional but maybe required? They seem like verification steps; not necessary for state changes but could be used as part of plan. However we don't need them if we achieve states directly via provision/configure/deploy.

But check: Are there any hidden preconditions? For provision (adva-nce_0) likely just requires service being down. No extra flags.

For configure (advance_o1) requires flag_interleave_2 open. Also presumably service must be provisioned.

For deploy (adva-nce_2) requires flag_0 set, art_0 published, flag_interleave_2 open, and service configured.

Thus our plan:

1. Provision svc_0 (notifier-0): adva-nce_0 with service svc_0.
2. Provision svc_1 (ingest-1): adva-nce_0 with service svc_1.
3. Open interleaving window: open_interleave_window.
4. Configure svc_0: advance_o1 with service svc_0.
5. Configure svc_1: advance_o1 with service svc_1.
6. Build artifact art_0: build-_art_0 with artifact art_0.
7. Publish artifact art_0: publish_art_o0 with artifact art_0.
8. Set flag_0: set_flag_o0.
9. Deploy svc_0: adva-nce_2 with service svc_0.

That's 9 steps exactly. Check ordering constraints: After provision, we can configure only after interleaving window open. We opened after provisioning both services, okay.

After configure, we need artifact built/published and flag set before deploy. We built artifact after configuring both services; that's fine because artifact not needed for configure. Then publish, then set flag, then deploy.

Check flag setting precondition: flag_0 must be false before setting. Initially false, we haven't set it yet, so okay.

Check artifact build precondition: artifact absent initially, we can build.

Publish precondition: artifact must be built; we built just before.

Deploy precondition: flag_0 set, artifact published, flag_interleave_2 open, service configured. All satisfied.

Now ensure we didn't violate any other constraints like a service can only be configured once provisioned etc. We provisioned both before configuring.

Now confirm we used correct tool IDs exactly as given:

List:

- adva-nce_0 (provision) id: "adva-nce_0"
- advance_o1 (configure) id: "advance_o1"
- adva-nce_2 (deploy) id: "adva-nce_2"
- build-_art_0 (build_artifact) id: "build-_art_0"
- publish_art_o0 (publish_artifact) id: "publish_art_o0"
- set_flag_o0 (set_flag) id: "set_flag_o0"
- open_interleave_window id: "open_interleave_window"

Also we have verify_goal_readiness and stage_goal_gate but not needed.

Now output JSON array of objects with "tool" and "args". Args: for provision, configure, deploy: {"service": "svc_X"} where X is 0,1,2 accordingly. For build artifact: {"artifact": "art_0"}. For publish artifact: same. For set_flag: {"flag": "flag_0"}. For open_interleave_window: {} (no args).

Make sure to use exact strings as given in ENTITY IDS: svc_0, svc_1, svc_2, art_0, art_1, flag_0, flag_1, flag_interleave_2. For open_interleave_window tool, no args.

Thus final sequence:

[
 {"tool":"adva-nce_0","args":{"service":"svc_0"}},
 {"tool":"adva-nce_0","args":{"service":"svc_1"}},
 {"tool":"open_interleave_window","args":{}},
 {"tool":"advance_o1","args":{"service":"svc_0"}},
 {"tool":"advance_o1","args":{"service":"svc_1"}},
 {"tool":"build-_art_0","args":{"artifact":"art_0"}},
 {"tool":"publish_art_o0","args":{"artifact":"art_0"}},
 {"tool":"set_flag_o0","args":{"flag":"flag_0"}},
 {"tool":"adva-nce_2","args":{"service":"svc_0"}}
]

Check count: 9.

Now double-check that we didn't need to provision svc_2? Not needed for goal. Could leave down.

All good.

Return only JSON array.