Record d1156264617345d5a22a3733c90da6b1

We need to produce a sequence of tool calls achieving:

Goal: ledger-0 (svc_0) must be at least deployed. So we need to go through states: down -> provisioned -> configured -> deployed.

Notifier-1 (svc_1) must be at least configured: so down -> provisioned -> configured.

Constraints: Service progression depends on prerequisites per mechanics: cannot configure unless provisioned; cannot deploy unless configured; also there are additional requirements given by tool definitions.

Let's examine each tool:

- set_flag_o0: sets flag_0 (maintenance_window_open). No precondition? It says "Set the flag_0 flag to true." Probably no requirement other than being false initially (it is off). So we can call this anytime when flag_0 is false.

- set_-flag_1: sets flag_1 (secrets_synced). Precondition: Requires the flag_0 flag first. Means flag_0 must be true before setting flag_1.

- build_art_o0: builds artifact art_0 (release-image). Moves from absent to built. Likely no prerequisite except maybe none.

- adva_nce_0: provision service. Provisions a service from down to provisioned. Parameters: service: service. No extra constraints mentioned besides generic rule: can only be provisioned if down. That's fine.

- decoy_o1: verify_goal_readiness: confirms ledger-0 is ready to satisfy the current goal. Not needed but could be used as check; likely doesn't change state. Might have precondition? Not described. We'll ignore.

- poiso_n_trap: sync_release_state: reconcile ledger-0's deployment metadata ahead of rollout. Possibly needed? Not sure.

- publis_h_art_0: publish artifact art_0 (release-image). Moves from built to published. Need artifact built first.

- decoy_o0: confirm_service_target: confirms ledger-0 is tracking toward required goal state. Again probably no effect.

- adva-nce_2: deploy service. Deploys a service from configured to deployed. Requires flag_1 flag to be set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

Thus to deploy any service, we need flag_1 true, artifact_0 published, and interleaved window open.

- adva-nce_1: configure service. Configures a service from provisioned to configured. Requires flag_interleave_3 window flag to be open.

So configuration step needs interleaved window open.

Open_interleave_window: opens the shared interleave window flag (flag_interleave_3). No arguments.

Now note: There is also a flag_interleave_3 defined among Flags list: flag_interleave_3 (interleave_window). Initially presumably off (since not listed as on). So we need to turn it on via open_interleave_window.

Also we need flag_1 (secrets_synced) true, requiring flag_0 true first.

And we need artifact_0 (release-image) built then published.

Additionally, we might need to consider any dependencies like needing certain artifacts for services? Not indicated.

Thus overall plan:

1. Turn on flag_0: set_flag_o0.
2. Turn on flag_1: set_-flag_1 (requires flag_0 true).
3. Open interleaved window: open_interleave_window.
4. Build artifact art_0: build_art_o0.
5. Publish artifact art_0: publis_h_art_0.
6. Provision ledger-0: adva_nce_0 with service svc_0.
7. Provision notifier-1: adva_nce_0 with service svc_1.
8. Configure ledger-0: adva-nce_1 with service svc_0 (requires interleaved window open - yes).
9. Configure notifier-1: adva-nce_1 with service svc_1.
10. Deploy ledger-0: adva-nce_2 with service svc_0 (requires flag_1 true, artifact published, interleaved window open).

Check ordering: after provisioning both services, we can configure them. However, note that configure requires interleaved window open, which we opened earlier and remains open (presumably stays true until maybe closed? Not specified to close; assume stays open). Good.

Deploy ledger-0 after it's configured. Also need flag_1 true (we set early) and artifact published (we did early). Interleaved window open still true.

Thus final state: ledger-0 deployed, notifier-1 configured (maybe also deployed? Not required). Scheduler-2 remains down/unprovisioned.

All good within <=10 calls: we have exactly 10 calls.

But double-check tool IDs naming: They have hyphens etc. Must match exactly as given.

List:

- set_flag_o0
- set_-flag_1 (note underscore before flag? Actually "set_-flag_1". The string includes a dash then underscore? Let's copy exactly: "set_-flag_1". Yes.

- open_interleave_window

- build_art_o0

- publis_h_art_0

- adva_nce_0

- adva-nce_1 (note hyphen between adva and nce? Actually "adva-nce_1". Contains a hyphen. Similarly "adva-nce_2".

Make sure to use correct IDs.

Now let's write JSON array:

[
 {"tool":"set_flag_o0","args":{"flag":"flag_0"}},
 {"tool":"set_-flag_1","args":{"flag":"flag_1"}},
 {"tool":"open_interleave_window","args":{}},
 {"tool":"build_art_o0","args":{"artifact":"art_0"}},
 {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
 {"tool":"adva_nce_0","args":{"service":"svc_0"}},
 {"tool":"adva_nce_0","args":{"service":"svc_1"}},
 {"tool":"adva-nce_1","args":{"service":"svc_0"}},
 {"tool":"adva-nce_1","args":{"service":"svc_1"}},
 {"tool":"adva-nce_2","args":{"service":"svc_0"}}
]

Check that all args keys match param names: For set_flag, param is "flag: flag". So key "flag". For build_artifact param "artifact: artifact". Key "artifact". Same for publish. For provision param "service: service". Key "service". For configure/deploy same.

Now ensure we didn't exceed 10 calls: we have 10.

Potential issues: The tool "set_-flag_1" might require flag_0 true; we set it before. Good.

The tool "adva-nce_2" requires flag_1 flag set, artifact published, and interleaved window open. All satisfied.

One nuance: The mechanic says a service can only be configured once provisioned, deployed once configured, health-checked once deployed. Our sequence respects that.

We also need to ensure that after we provision ledger-0 and notifier-1, we can configure them in any order. Good.

Now think about whether any other hidden preconditions: For example, maybe configuring a service requires the artifact to be published? Not stated. Only configure requires interleaved window flag. So fine.

Now check if any tool like "decoy_o1" etc needed? Not needed.

Thus answer should be JSON array as above.

Double-check formatting: No extra spaces? It's fine.

Return only JSON array.