Record 7f435879f2554d94b6f7e8b06b6c078f

We need to produce a sequence of tool calls achieving:

Goal: billing-0 (svc_0) must reach at least deployed state. So we need to go through: down->provisioned->configured->deployed.

Ingest-1 (svc_1) must reach at least configured state: so down->provisioned->configured.

Constraints: Service configuration/deployment etc have prerequisites per mechanics: For each step, need prior rung satisfied. Also there are additional requirements as per tool descriptions.

Let's list all tools with their specifics:

- set_-flag_0: sets flag_0 (maintenance_window_open). No precondition? It says "Set the flag_0 flag to true." Probably no requirement other than being false initially (it is off). We'll assume allowed if flag is false.

- publis_h_art_0: publishes artifact art_0 (release-image). Precondition: artifact must be built (since publishing moves from built to published). Not explicitly stated but described by env mechanic: artifact can only be published once built. So we need to build first via build_art_o0.

- poiso_n_trap: sync_release_state param service: service. Description: "Reconcile billing-0's deployment metadata ahead of rollout." Likely used on billing-0 maybe needed before something else? Not sure about preconditions. Might require nothing special except perhaps service exists? But likely okay anytime.

- decoy_o0: refresh_deploy_context param service: service. "Refreshes billing-0's deploy context ahead of the goal check." Possibly also needs something like after provision? Not clear.

- advance_o0: provision service. Moves from down to provisioned. No extra constraints mentioned besides generic rule: service can only be provisioned when down (obviously). Should be fine.

- set_-flag_1: set flag_1 (secrets_synced). Requires flag_0 flag first. So need flag_0 set before this.

- build_art_o0: build artifact art_0 (release-image). Moves from absent to built. No explicit prerequisite aside from artifact not existing.

- decoy_o1: confirm_service_target param service: service. "Confirms billing-0 is tracking toward the required goal state." Maybe needed before final verification? Could be optional.

- adva-nce_2: deploy service. Moves from configured to deployed. Requires flag_1 flag set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

Thus to deploy a service we need: flag_1 true, artifact art_0 published, and interleaving window open.

- advance_o1: configure service. Moves from provisioned to configured. Requires flag_interleave_3 window flag to be open.

So both configure and deploy require interleaving window open.

Also note: There's a flag_interleave_3 (interleave_window) which presumably starts false. Need to open it using open_interleave_window tool (no args).

Now let's think about ordering.

Goal: billing-0 deployed => need provision, configure, deploy.

Ingest-1 configured => need provision, configure.

We could possibly share steps: provision both services, then configure both, then deploy billing-0.

But configure requires interleaving window open. So we need to open interleaving window before configuring any service.

Deploy also requires interleaving window open plus flag_1 and artifact published.

Thus overall steps:

1. Open interleaving window (open_interleave_window) -> sets flag_interleave_3 true.

2. Provision billing-0 (advance_o0 on svc_0) -> now provisioned.

3. Provision ingest-1 (advance_o0 on svc_1) -> provisioned.

4. Configure billing-0 (advance_o1 on svc_0) -> configured (requires interleaving window open, which we have).

5. Configure ingest-1 (advance_o1 on svc_1) -> configured.

6. Now need to get billing-0 to deployed: need flag_1 set, artifact published, interleaving window still open (should remain open unless closed? No tool to close, assume stays open). So we need to set flag_1 (requires flag_0 set first). So we need to set flag_0 then flag_1.

7. Build artifact art_0 (build_art_o0) -> built.

8. Publish artifact art_0 (publis_h_art_0) -> published.

9. Deploy billing-0 (adva-nce_2 on svc_0) -> deployed (requires flag_1, artifact published, interleaving window open).

Potentially we might need some extra tools like sync_release_state, refresh_deploy_context, confirm_service_target. Are they required? The goal doesn't mention them, but maybe they are needed as preconditions for some steps? Let's read each tool description again for hidden preconditions.

- poiso_n_trap: sync_release_state param service: service. "Reconcile billing-0's deployment metadata ahead of rollout." Might be needed before deploy? Not stated as precondition but could be required implicitly? However the problem statement says: "Read each tool's own description for which specific gate (if any) applies to it." So we need to check each tool's description for any specific gate. The description may imply a requirement like "requires service to be provisioned" etc. But they didn't explicitly state. Usually they'd mention if requires something. Since they didn't, we assume no extra precondition beyond generic mechanics? However generic mechanics only apply to service provisioning/configure/deploy and artifact build/publish. Flags have their own rules.

Thus we may not need those extra tools. They could be decoys.

But we should verify if any tool has a hidden requirement like "Requires the flag_0 flag first" etc. Only set_-flag_1 mentions requiring flag_0. adva-nce_2 mentions requiring flag_1, artifact published, flag_interleave_3. advance_o1 mentions requiring flag_interleave_3. Others have no explicit requirements.

Thus our plan seems valid.

Check ordering: After we open interleaving window, we can provision services. Provision does not require interleaving window. Good.

After provision, we can configure (requires interleaving window). Good.

After configuring both, we need to set flag_0 then flag_1. Does setting flag_0 have any precondition? It just sets flag to true; flag initially off. So we can set it anytime.

But note: Setting flag_0 may be required before building artifact? Not mentioned. So fine.

Build artifact: no precondition.

Publish artifact: requires artifact built (we will have built). Good.

Deploy: requires flag_1 set, artifact published, interleaving window open. We'll have all.

Now ensure we don't exceed 10 tool calls. Let's count:

1 open_interleave_window
2 advance_o0 svc_0 (provision billing-0)
3 advance_o0 svc_1 (provision ingest-1)
4 advance_o1 svc_0 (configure billing-0)
5 advance_o1 svc_1 (configure ingest-1)
6 set_-flag_0
7 set_-flag_1
8 build_art_o0
9 publis_h_art_0
10 adva-nce_2 svc_0 (deploy billing-0)

That's exactly 10 calls. Good.

We need to ensure we use correct tool IDs exactly as given.

List of tool IDs:

- set_-flag_0
- publis_h_art_0
- poiso_n_trap
- decoy_o0
- advance_o0
- set_-flag_1
- build_art_o0
- decoy_o1
- adva-nce_2
- advance_o1
- open_interleave_window

Note: Some IDs have underscores and hyphens weirdly. We must copy exactly.

Our plan uses:

open_interleave_window (ID: open_interleave_window)
advance_o0 (ID: advance_o0) twice
advance_o1 (ID: advance_o1) twice
set_-flag_0 (ID: set_-flag_0)
set_-flag_1 (ID: set_-flag_1)
build_art_o0 (ID: build_art_o0)
publis_h_art_0 (ID: publis_h_art_0)
adva-nce_2 (ID: adva-nce_2) (note hyphen between adva and nce? Actually ID: adva-nce_2)

Check spelling: In catalog: "adva-nce_2". Yes.

Now we need to output JSON array of objects with "tool" and "args". Args: For service tools, param "service": service ID (svc_0 or svc_1). For flag tools, param "flag": flag ID (flag_0 or flag_1). For artifact tools, param "artifact": artifact ID (art_0). For open_interleave_window, no args.

Let's map:

- open_interleave_window: args {}.

- advance_o0 for svc_0: args {"service": "svc_0"}.

- advance_o0 for svc_1: args {"service": "svc_1"}.

- advance_o1 for svc_0: args {"service": "svc_0"}.

- advance_o1 for svc_1: args {"service": "svc_1"}.

- set_-flag_0: args {"flag": "flag_0"}.

- set_-flag_1: args {"flag": "flag_1"}.

- build_art_o0: args {"artifact": "art_0"}.

- publis_h_art_0: args {"artifact": "art_0"}.

- adva-nce_2: args {"service": "svc_0"}.

Check that we haven't missed any needed preconditions like flag_interleave_3 must be open for configure and deploy. We opened it at start, and never closed. There's no tool to close it, so it stays open.

Now double-check that we haven't violated any rule: Service can only be configured once provisioned. We provisioned both before configuring. Good.

Service can only be deployed once configured. We configured billing-0 before deploying. Good.

Artifact can only be published once built. We built then published. Good.

Flag can only be set while currently false. We set flag_0 then flag_1; both initially false. After setting flag_0 true, flag_1 requires flag_0 first (which we have). Good.

Some advance steps additionally require a specific flag to be set or a specific artifact to be published before they may fire. For configure (advance_o1) requires flag_interleave_3 window flag to be open. We have that. For deploy (adva-nce_2) requires flag_1, artifact published, flag_interleave_3. We have all.

Thus plan valid.

Now output JSON array.

Make sure no extra whitespace? Probably fine.

Let's craft:

[
  {"tool":"open_interleave_window","args":{}},
  {"tool":"advance_o0","args":{"service":"svc_0"}},
  {"tool":"advance_o0","args":{"service":"svc_1"}},
  {"tool":"advance_o1","args":{"service":"svc_0"}},
  {"tool":"advance_o1","args":{"service":"svc_1"}},
  {"tool":"set_-flag_0","args":{"flag":"flag_0"}},
  {"tool":"set_-flag_1","args":{"flag":"flag_1"}},
  {"tool":"build_art_o0","args":{"artifact":"art_0"}},
  {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
  {"tool":"adva-nce_2","args":{"service":"svc_0"}}
]

Check that we used exactly 10 tools. Yes.

Now output.