Record 5771fb61f5cd4c6db1bf7a48ebd59002

We need to produce a JSON array of tool calls that will achieve the goal: service 'reporting-0' must reach at least 'deployed' state, and service 'registry-1' must reach at least 'configured' state.

We have current state: all services down (not provisioned). No artifacts exist. Flags: maintenance_window_open (flag_0) off, secrets_synced (flag_1) off, feature_gate_on (flag_2) off, interleave_window (flag_interleave_3) presumably off (maybe default). There's also a flag_interleave_3 mentioned but not listed among flags? It says flag_interleave_3 (interleave_window). There's a tool open_interleave_window to open it.

We have tools:

- build_art_o0: build artifact art_0 (release-image). Moves from absent to built.

- confirm_service_target: dec-oy_1 and dec-oy_0? Actually there are two confirm_service_target tools: dec-oy_1 and dec-oy_0, both confirm_service_target with param service. Probably used to check? But we may not need to call them unless needed.

- sync_release_state: poiso_n_trap (typo) with param service: service. Reconcile reporting-0's deployment metadata ahead of rollout.

- publish_artifact: publish_art_o0 with param artifact: artifact. Moves built to published.

- set_flag_1: set_flag with flag: flag (sets flag_1). Requires flag_0 first.

- provision: adva_nce_2 (provision) with param service: service. Moves down to provisioned.

- set_flag_0: set_-flag_0 (set_flag) with flag: flag (sets flag_0). No preconditions? It just sets flag_0 to true.

- deploy: adva_nce_1 (deploy) with param service: service. Moves configured to deployed. Requires flag_1 flag to be set. Requires art_0 artifact to be published. Requires flag_interleave_3 window flag to be open.

- configure: adva_nce_1? Actually adva_nce_1 is configure? Wait: adva_nce_1 name: configure with param service: service. Moves provisioned to configured. Requires flag_interleave_3 window flag to be open.

- open_interleave_window: open_interleave_window with no args. Opens the shared interleave window flag.

Goal: reporting-0 must reach at least 'deployed' state. That means we need to provision it, configure it, then deploy it. To deploy, we need flag_1 set, art_0 published, and flag_interleave_3 open.

Also registry-1 must reach at least 'configured' state. That means we need to provision it, then configure it. To configure, we need flag_interleave_3 open (same requirement). No other flags needed? The configure tool only requires flag_interleave_3 open. It does not require flag_1 or artifact publishing. So we can configure registry-1 after provisioning, as long as interleave window is open.

Thus plan:

We need to open interleave window flag first? Actually configure requires flag_interleave_3 open. Deploy also requires it. So we need to open it before using configure or deploy.

We also need to set flag_0 (maintenance_window_open) before setting flag_1 (secrets_synced) because set_flag_1 requires flag_0 first. So we need to set flag_0 true, then set flag_1 true.

We also need to build artifact art_0 (release-image) then publish it.

We need to provision both services (svc_0 and svc_1). Provision moves down to provisioned. That's it.

Then configure svc_1 (registry-1) to configured. That requires interleave window open.

Then deploy svc_0 (reporting-0) to deployed. That requires flag_1 set, art_0 published, and interleave window open.

Thus sequence:

1. set_flag_0 (set_-flag_0) with flag: flag_0 (maintenance_window_open). This sets flag_0 true.

2. set_flag_1 (set_flag_1) with flag: flag_1 (secrets_synced). This sets flag_1 true (requires flag_0 already true).

3. open_interleave_window (no args) to open flag_interleave_3.

4. build_art_o0 (artifact: art_0) to build release-image.

5. publish_artifact (artifact: art_0) to publish it.

6. provision service svc_0 (service: svc_0) to provision reporting-0.

7. provision service svc_1 (service: svc_1) to provision registry-1.

8. configure service svc_1 (service: svc_1) to configure registry-1 (requires interleave window open, which we have).

9. deploy service svc_0 (service: svc_0) to deploy reporting-0 (requires flag_1 set, art_0 published, interleave window open). All satisfied.

We have used 9 tool calls. That's within 10.

Check preconditions:

- set_flag_0: no preconditions? It just sets flag_0 to true. Should be fine.

- set_flag_1: requires flag_0 flag first. We set flag_0 earlier, so okay.

- open_interleave_window: no preconditions.

- build_art_o0: no preconditions.

- publish_artifact: requires artifact built. We built it, so okay.

- provision: no preconditions.

- configure: requires flag_interleave_3 open. We opened it, so okay.

- deploy: requires flag_1 set, art_0 published, flag_interleave_3 open. All satisfied.

Thus sequence works.

Now we need to output JSON array of objects with "tool": "<tool id>", "args": {...}. Use exact tool ids as given.

Tool ids:

- set_-flag_0 is named "set_-flag_0"? Actually the tool id is "set_-flag_0"? The catalog lists:

- id: set_-flag_0 | name: set_flag | params: flag: flag

Yes id is "set_-flag_0". So we must use that exact id.

- set_flag_1 id is "set_flag_1"? Actually catalog: id: set_flag_1 | name: set_flag | params: flag: flag. So id is "set_flag_1".

- open_interleave_window id is "open_interleave_window".

- build_art_o0 id is "build_art_o0".

- publish_art_o0 id is "publish_art_o0".

- adva_nce_2 (provision) id is "adva_nce_2". It takes param service: service.

- adva_nce_1 (configure) id is "adva_nce_1". It takes param service: service.

- adva_nce_1? Wait there is also "adva-nce_1" with name: deploy? Actually catalog: id: adva-nce_1 | name: deploy ... but also id: adva_nce_1 | name: configure ... Hmm there is confusion: The catalog lists:

- id: adva-nce_1 | name: deploy | params: service: service

- id: adva_nce_1 | name: configure | params: service: service

But they have same id? Actually they might be two different tools with same id? The list shows:

- id: adva-nce_1 | name: deploy | params: service: service

- id: adva_nce_1 | name: configure | params: service: service

But the id is "adva-nce_1" vs "adva_nce_1"? Let's check precisely:

The catalog lines:

- id: adva-nce_1 | name: deploy | params: service: service

- id: adva_nce_1 | name: configure | params: service: service

So there are two distinct ids: "adva-nce_1" (with hyphen) for deploy, and "adva_nce_1" (with underscore) for configure. Actually the first is "adva-nce_1" (dash). The second is "adva_nce_1" (underscore). So we must use the correct id for each.

Thus:

- Deploy tool id: "adva-nce_1" (note hyphen). Params: service: service.

- Configure tool id: "adva_nce_1" (underscore). Params: service: service.

Thus we need to use "adva-nce_1" for deploy, and "adva_nce_1" for configure.

Now list all tool calls in order:

1. {"tool":"set_-flag_0","args":{"flag":"flag_0"}}? Actually param is flag: flag. So we need to pass the flag id? The flag name is flag_0? The flag id is flag_0? The catalog says set_flag param: flag: flag. So we need to pass the flag identifier. The flag identifiers are flag_0, flag_1, flag_2, flag_interleave_3. So we pass "flag_0". So args: {"flag":"flag_0"}.

Thus first call: {"tool":"set_-flag_0","args":{"flag":"flag_0"}}

2. {"tool":"set_flag_1","args":{"flag":"flag_1"}}

3. {"tool":"open_interleave_window","args":{}} (no args)

4. {"tool":"build_art_o0","args":{"artifact":"art_0"}}

5. {"tool":"publish_artifact","args":{"artifact":"art_0"}}

6. {"tool":"adva_nce_2","args":{"service":"svc_0"}} (provision svc_0)

7. {"tool":"adva_nce_2","args":{"service":"svc_1"}} (provision svc_1)

8. {"tool":"adva_nce_1","args":{"service":"svc_1"}} (configure svc_1)

9. {"tool":"adva-nce_1","args":{"service":"svc_0"}} (deploy svc_0)

Check that we used correct ids: "adva_nce_2" for provision, "adva_nce_1" for configure, "adva-nce_1" for deploy.

Now ensure we didn't miss any required steps: We also need to maybe confirm_service_target? Not needed.

We also might need to use "poiso_n_trap" (sync_release_state) to reconcile reporting-0's deployment metadata ahead of rollout. The goal doesn't explicitly require that, but maybe it's needed for deployment? The description says "Reconcile reporting-0's deployment metadata ahead of rollout." Might be required before deploy? Not explicitly required by tool preconditions, but maybe it's a good step. However we are limited to 10 calls and we already used 9. We could add it if needed, but not required.

The goal only requires reporting-0 to reach at least deployed state. The deploy tool moves from configured to deployed. But to be configured, we need to configure it. Did we configure svc_0? No, we only provisioned svc_0, but we didn't configure it. Actually to deploy, we need the service to be configured first (i.e., be in configured state). The deploy tool moves from configured to deployed. So the service must already be configured. Did we configure svc_0? No, we only provisioned it. So we need to configure svc_0 as well, but we only need it to reach at least deployed, which implies it must be configured before deployment. So we need to configure svc_0 as well. However the goal only says "service 'reporting-0' must reach at least the 'deployed' state". That implies it must be deployed, which requires it to be configured first. So we need to configure svc_0. The configure tool requires flag_interleave_3 open, which we have. So we need to call configure for svc_0 as well. But we also need to configure svc_1 (registry-1) to at least configured, which we already did. So we need to configure both services.

Thus we need to add a configure call for svc_0 (reporting-0). That will be another tool call. Let's see if we have capacity: we have used 9 calls; adding one more makes 10, which is max allowed. So we can fit it.

Thus we need to add configure for svc_0 after provisioning it, before deploying. So order:

6. provision svc_0

7. provision svc_1

8. configure svc_1

9. configure svc_0

10. deploy svc_0

That uses 10 calls exactly.

Check preconditions: configure requires flag_interleave_3 open, which we opened earlier. So okay.

Thus final sequence of 10 calls:

1. set_-flag_0 flag: flag_0

2. set_flag_1 flag: flag_1

3. open_interleave_window

4. build_art_o0 artifact: art_0

5. publish_artifact artifact: art_0

6. adva_nce_2 service: svc_0 (provision svc_0)

7. adva_nce_2 service: svc_1 (provision svc_1)

8. adva_nce_1 service: svc_1 (configure svc_1)

9. adva_nce_1 service: svc_0 (configure svc_0)

10. adva-nce_1 service: svc_0 (deploy svc_0)

Now verify each tool id correctness:

- "set_-flag_0" is correct.

- "set_flag_1" is correct.

- "open_interleave_window" is correct.

- "build_art_o0" is correct.

- "publish_artifact" is correct.

- "adva_nce_2" is correct for provision.

- "adva_nce_1" is correct for configure.

- "adva-nce_1" is correct for deploy.

Now ensure param names: For provision tool, param is service: service. So args: {"service":"svc_0"} etc.

For configure tool, param is service: service. So args: {"service":"svc_1"} etc.

For deploy tool, param is service: service. So args: {"service":"svc_0"}.

For build_art_o0, param is artifact: artifact. So args: {"artifact":"art_0"}.

For publish_artifact, param is artifact: artifact. So args: {"artifact":"art_0"}.

For set_flag_0, param is flag: flag. So args: {"flag":"flag_0"}.

For set_flag_1, param is flag: flag. So args: {"flag":"flag_1"}.

For open_interleave_window, no args.

Thus JSON array of objects in order.

Now produce output exactly as JSON array, no extra text, no markdown.

Let's construct:

[
  {"tool":"set_-flag_0","args":{"flag":"flag_0"}},
  {"tool":"set_flag_1","args":{"flag":"flag_1"}},
  {"tool":"open_interleave_window","args":{}},
  {"tool":"build_art_o0","args":{"artifact":"art_0"}},
  {"tool":"publish_artifact","args":{"artifact":"art_0"}},
  {"tool":"adva_nce_2","args":{"service":"svc_0"}},
  {"tool":"adva_nce_2","args":{"service":"svc_1"}},
  {"tool":"adva_nce_1","args":{"service":"svc_1"}},
  {"tool":"adva_nce_1","args":{"service":"svc_0"}},
  {"tool":"adva-nce_1","args":{"service":"svc_0"}}
]

Check that we used correct id for deploy: "adva-nce_1". Yes.

Now ensure no trailing commas. Provide as a single line? The instruction says output only a JSON array. It can be formatted with line breaks; it's still JSON. Probably okay.

Thus final answer.