Record 161400caffd846e5b9dfa4b0291321f3

We need to produce a JSON array of tool calls that will achieve the goal: webhooks-0 must reach at least 'deployed' state, webhooks-1 must reach at least 'configured' state.

Current state: all services down (not provisioned). No artifacts exist. Flags: maintenance_window_open (flag_0) off, secrets_synced (flag_1) off, feature_gate_on (flag_2) off, interleave_window (flag_interleave_3) presumably off (not mentioned but likely off). Also there is a flag_interleave_3 mentioned but not described; we have a tool open_interleave_window to open it.

We have tools:

- audit_rollout_plan (dec_oy_0) takes service param; cross-checks rollout plan against goal state. Probably used to verify but not needed for moving state.

- build_artifact (build_art_0) builds artifact; param artifact: artifact (entity id). So we can build art_0 (release-image), art_1 (db-migration), art_2 (config-bundle). Need to build them before publishing.

- publish_artifact (publis_h_art_0) publishes artifact; param artifact: artifact. Must be built first.

- provision (adva-nce_0) provisions a service; param service: service. Moves from down to provisioned.

- sync_release_state (poiso-n_trap) reconciles webhooks-0's deployment metadata ahead of rollout. param service: service. Probably needed before deployment steps.

- set_flag_0 (set_flag) sets flag_0 to true. No preconditions given? It just sets flag_0; but maybe other flags require flag_0 first.

- set_flag_1 (set_flag) sets flag_1 to true; requires flag_0 first.

- confirm_service_target (dec_oy_1) confirms webhooks-0 is tracking toward required goal state. param service: service.

- deploy (adva-nce_2) deploys a service; param service: service; requires flag_1 set, art_0 published, flag_interleave_3 open.

- configure (advance_o1) configures a service; param service: service; requires flag_interleave_3 open.

- open_interleave_window (open_interleave_window) opens the shared interleave window flag (no args). This presumably sets flag_interleave_3 to true.

We need to achieve: webhooks-0 deployed, webhooks-1 configured.

We have only two services of interest: svc_0 (webhooks-0) and svc_1 (webhooks-1). There's also svc_2 (cache-2) but not needed.

We need to provision both services first (adva-nce_0). Then configure svc_1 (advance_o1) to get it to configured. For svc_0, we need to configure then deploy. Configure requires flag_interleave_3 open. Deploy requires flag_1 set, art_0 published, flag_interleave_3 open.

Thus we need to:

1. Build artifact art_0 (release-image) (build_art_0 with artifact art_0). Then publish it (publis_h_art_0 with artifact art_0). Possibly also need to build other artifacts? Not required for deployment of webhooks? The deploy tool requires art_0 published. So we need to build and publish art_0.

2. Set flag_0 (maintenance_window_open) to true (set_flag_0). This may be required for other steps? Not explicitly required but maybe needed for something else. Not required for deploy directly, but maybe needed for something else like set_flag_1 requires flag_0 first. Indeed set_flag_1 requires flag_0 first. So we need to set flag_0 before we can set flag_1.

3. Set flag_1 (secrets_synced) to true (set_flag_1). This will be required for deploy.

4. Open interleave window (open_interleave_window) to set flag_interleave_3 true. This is required for configure and deploy.

5. Provision svc_0 (adva-nce_0 with service svc_0). Then configure svc_0 (advance_o1 with service svc_0). Then sync_release_state (poiso-n_trap) maybe needed before deploy? The tool sync_release_state reconciles webhooks-0's deployment metadata ahead of rollout. Probably needed before deploy. It takes service param. So we can call it on svc_0.

6. Deploy svc_0 (adva-nce_2 with service svc_0). This will move it to deployed.

7. Provision svc_1 (adva-nce_0 with service svc_1). Then configure svc_1 (advance_o1 with service svc_1). That's enough to get it to configured.

We must respect ordering: each tool's preconditions must hold at call time.

Let's list preconditions per tool:

- build_artifact: no preconditions mentioned; just builds artifact from absent to built.

- publish_artifact: requires artifact built; i.e., artifact must be in built state. So after building, we can publish.

- set_flag_0: no preconditions; can set flag_0 from off to on.

- set_flag_1: requires flag_0 already true. So we must call set_flag_0 before set_flag_1.

- open_interleave_window: no preconditions; can open.

- advance_o1 (configure): requires flag_interleave_3 open. So we must call open_interleave_window before configure.

- deploy: requires flag_1 set, art_0 published, flag_interleave_3 open. So we need to have set_flag_1, published art_0, opened interleave window before deploy.

- provision: no preconditions; can provision down service.

- sync_release_state: maybe no preconditions; but it's about reconciling webhooks-0's deployment metadata ahead of rollout. Probably can be called anytime after provision? Not sure but likely okay.

- confirm_service_target: maybe just a check; not needed for state changes.

- audit_rollout_plan: maybe just a check.

We need to output only tool calls, no extra text.

We need to keep within 10 calls.

Let's plan sequence:

1. build_artifact artifact art_0 (release-image). (build_art_0 with artifact art_0)

2. publish_artifact artifact art_0 (publis_h_art_0 with artifact art_0). (Now art_0 published)

3. set_flag_0 flag flag_0 (set_flag_0 with flag flag_0). (Set maintenance_window_open true)

4. set_flag_1 flag flag_1 (set_flag_1 with flag flag_1). (Requires flag_0 true, which we just set)

5. open_interleave_window (open_interleave_window with no args). (Opens interleave window flag)

6. provision service svc_0 (adva-nce_0 with service svc_0). (Provision webhooks-0)

7. provision service svc_1 (adva-nce_0 with service svc_1). (Provision webhooks-1)

8. configure service svc_0 (advance_o1 with service svc_0). (Configure webhooks-0; requires interleave window open, which we have)

9. configure service svc_1 (advance_o1 with service svc_1). (Configure webhooks-1; also requires interleave window open)

Now we need to deploy svc_0. That requires flag_1 set (we set), art_0 published (we published), flag_interleave_3 open (we opened). So we can call deploy with service svc_0 (adva-nce_2 with service svc_0). That will move it to deployed.

We also might need to sync_release_state for svc_0 before deploy? The tool sync_release_state (poiso-n_trap) reconciles webhooks-0's deployment metadata ahead of rollout. Probably should be called before deploy. It takes service param. So we can insert it after provision maybe before configure? Or after configure? The description: "Reconcile webhooks-0's deployment metadata ahead of rollout." Likely needed before deploy. So we can add a step after provision and before configure (or after configure but before deploy). Let's add it.

Thus sequence could be:

1. build_artifact art_0
2. publish_artifact art_0
3. set_flag_0
4. set_flag_1
5. open_interleave_window
6. provision svc_0
7. sync_release_state svc_0 (poiso-n_trap)
8. provision svc_1
9. configure svc_0
10. configure svc_1
11. deploy svc_0

That's 11 calls, exceeding 10 limit. We need to reduce.

Maybe we can skip provision svc_1? But we need to configure svc_1 to reach configured state. To configure, it must be provisioned first. So we need provision svc_1. That's one call.

We also need to provision svc_0 (1 call). So that's 2 provision calls.

We need build and publish artifact (2 calls). That's 4.

We need set_flag_0 (1) =>5, set_flag_1 (1) =>6, open_interleave_window (1) =>7, configure svc_0 (1) =>8, configure svc_1 (1) =>9, deploy svc_0 (1) =>10. That's exactly 10 calls if we omit sync_release_state. But maybe we need sync_release_state? The goal does not explicitly require it; it's just a tool that may be used. Not required. So we can skip it.

But we must ensure that deploy's preconditions are met: flag_1 set, art_0 published, flag_interleave_3 open. We have those.

Thus we can produce 10 calls exactly.

Let's list them in order:

1. build_artifact with artifact art_0
2. publish_artifact with artifact art_0
3. set_flag_0 with flag flag_0
4. set_flag_1 with flag flag_1
5. open_interleave_window (no args)
6. provision service svc_0
7. provision service svc_1
8. configure service svc_0
9. configure service svc_1
10. deploy service svc_0

Check preconditions:

- build_artifact: ok.
- publish_artifact: after build, artifact built, so ok.
- set_flag_0: ok.
- set_flag_1: requires flag_0 true; we set it just before, so ok.
- open_interleave_window: ok.
- provision svc_0: down to provisioned, ok.
- provision svc_1: down to provisioned, ok.
- configure svc_0: requires flag_interleave_3 open; we opened it, so ok.
- configure svc_1: same requirement, ok.
- deploy svc_0: requires flag_1 set (yes), art_0 published (yes), flag_interleave_3 open (yes). So ok.

All good.

Now we need to output JSON array of objects with "tool" and "args". The tool ids are given as:

- build_art_0 (id: build_art_0) name: build_artifact
- publis_h_art_0 (id: publis_h_art_0) name: publish_artifact
- set_flag_0 (id: set_flag_0) name: set_flag
- set_flag_1 (id: set_flag_1) name: set_flag
- open_interleave_window (id: open_interleave_window) name: open_interleave_window
- adva-nce_0 (id: adva-nce_0) name: provision
- advance_o1 (id: advance_o1) name: configure
- adva-nce_2 (id: adva-nce_2) name: deploy

We need to use exact tool ids as given.

Thus mapping:

- build_artifact -> "build_art_0"
- publish_artifact -> "publis_h_art_0"
- set_flag_0 -> "set_flag_0"
- set_flag_1 -> "set_flag_1"
- open_interleave_window -> "open_interleave_window"
- provision -> "adva-nce_0"
- configure -> "advance_o1"
- deploy -> "adva-nce_2"

Now construct each call:

1. {"tool":"build_art_0","args":{"artifact":"art_0"}}
2. {"tool":"publis_h_art_0","args":{"artifact":"art_0"}}
3. {"tool":"set_flag_0","args":{"flag":"flag_0"}}
4. {"tool":"set_flag_1","args":{"flag":"flag_1"}}
5. {"tool":"open_interleave_window","args":{}} (no args)
6. {"tool":"adva-nce_0","args":{"service":"svc_0"}}
7. {"tool":"adva-nce_0","args":{"service":"svc_1"}}
8. {"tool":"advance_o1","args":{"service":"svc_0"}}
9. {"tool":"advance_o1","args":{"service":"svc_1"}}
10. {"tool":"adva-nce_2","args":{"service":"svc_0"}}

Check that we used correct param names: For set_flag tools, param is "flag". The description: set_flag_0 name: set_flag params: flag: flag. So args: {"flag":"flag_0"}.

Similarly set_flag_1: {"flag":"flag_1"}.

For provision: param service: service. So {"service":"svc_0"}.

For configure (advance_o1): param service: service. So {"service":"svc_0"}.

For deploy (adva-nce_2): param service: service. So {"service":"svc_0"}.

All good.

Now output just JSON array of these objects, no extra text.

Make sure it's a valid JSON array.

Thus final answer: a JSON array with 10 objects in order.

Let's produce it.