Record d226eeca65204a37832fcf200f4a5c6e

We need to produce a JSON array of tool calls that satisfy the goal: service cache-0 (svc_0) must reach at least 'deployed' state, and service ledger-1 (svc_1) must reach at least 'configured' state.

Current state: all services down (not provisioned). No artifacts exist. Flags: maintenance_window_open (flag_0) is off, secrets_synced (flag_1) is off, interleave_window flag (flag_interleave_2) is off (presumably). Also need to build and publish artifacts before deployment.

Tools:

- provision: moves service from down to provisioned. Requires service id.

- build_artifact: builds artifact from absent to built.

- publish_artifact: publishes artifact from built to published.

- sync_release_state: "Reconcile cache-0's deployment metadata ahead of rollout." Not sure what it does; maybe it's a step that requires something? It probably just does something but may have preconditions? Not listed; maybe no preconditions. It moves something? Not needed maybe.

- verify_goal_readiness: confirms cache-0 is ready to satisfy the current goal. Probably used after some steps.

- set_flag_0: set flag_0 to true (maintenance_window_open). Must be currently false; can set.

- refresh_deploy_context: refreshes cache-0's deploy context ahead of goal check.

- deploy: moves service from configured to deployed. Requires flag_0 set, art_0 published, flag_interleave_2 open.

- configure: moves service from provisioned to configured. Requires flag_interleave_2 open.

- open_interleave_window: opens the shared interleave window flag (makes flag_interleave_2 true). No args.

We need to achieve:

- cache-0 (svc_0) must reach at least 'deployed' state. That means we need to provision it, configure it, then deploy it. Provision -> configured -> deployed. Actually provision moves from down to provisioned. Then configure moves from provisioned to configured. Then deploy moves from configured to deployed. So we need to do provision, configure, deploy for svc_0.

- ledger-1 (svc_1) must reach at least 'configured' state. So we need to provision it, then configure it. No need to deploy.

Constraints:

- configure (advance_o1) requires flag_interleave_2 open.

- deploy requires flag_0 (maintenance_window_open) set, art_0 published, flag_interleave_2 open.

- set_flag_0 can set flag_0 only while currently false. So we can set it once.

- open_interleave_window opens flag_interleave_2 (makes it true). Probably can be called anytime; no precondition.

- build_artifact and publish_artifact for art_0 (release-image). Need to build then publish.

- There's also sync_release_state and verify_goal_readiness and refresh_deploy_context maybe needed for cache-0 readiness? Possibly needed to satisfy preconditions for deploy? Not listed as preconditions but maybe they are required steps. However the goal only requires deployed state; we can just follow the ladder.

But we must respect tool preconditions: each tool has its own preconditions that must hold at the moment of calling. We need to ensure we meet them.

Let's list each tool with its preconditions (from description):

- provision: moves service from down to provisioned. No explicit preconditions besides service being down? Probably requires service is down. That's true for svc_0 and svc_1.

- build_artifact: builds artifact (art_0) from absent to built. No preconditions besides artifact not existing? Probably requires artifact absent. That's true.

- publish_artifact: publishes artifact from built to published. Requires artifact built. So after building, we can publish.

- poison_trapo0 (sync_release_state): "Reconcile cache-0's deployment metadata ahead of rollout." Probably no preconditions? Might require something else? Not specified.

- decoy_o1 (verify_goal_readiness): "Confirms cache-0 is ready to satisfy the current goal." Probably no preconditions? Might require something else? Not specified.

- set_flag_0: set flag_0 flag to true. Must be currently false. That's true initially.

- dec-oy_0 (refresh_deploy_context): "Refreshes cache-0's deploy context ahead of the goal check." Probably no preconditions.

- adva-nce_2 (deploy): Deploy a service, moving it from 'configured' to 'deployed'. Requires the flag_0 flag to be set. Requires the art_0 artifact to be published. Requires the flag_interleave_2 window flag to be open.

- advance_o1 (configure): Configure a service, moving it from 'provisioned' to 'configured'. Requires the flag_interleave_2 window flag to be open.

- open_interleave_window: opens the shared interleave window flag. No args.

Thus we need to sequence calls to satisfy all preconditions.

Goal: svc_0 deployed, svc_1 configured.

We also need to build and publish art_0 (release-image) because deploy requires it published.

We also need to set flag_0 (maintenance_window_open) to true before deploy.

We need to open_interleave_window to set flag_interleave_2 true, which is required for both configure and deploy.

Thus steps:

1. open_interleave_window (makes flag_interleave_2 true). This can be done early.

2. set_flag_0 (set maintenance_window_open to true). This can be done anytime while false.

3. provision svc_0 (cache-0) -> moves to provisioned.

4. provision svc_1 (ledger-1) -> moves to provisioned.

Now we need to configure svc_0 and svc_1. configure requires flag_interleave_2 open, which we have.

5. configure svc_0 (advance_o1 with service svc_0). This moves from provisioned to configured.

6. configure svc_1 (advance_o1 with service svc_1). Moves to configured.

Now we need to build and publish art_0.

7. build_artifact artifact art_0.

8. publish_artifact artifact art_0.

Now we need to deploy svc_0.

But deploy requires flag_0 set (maintenance_window_open), art_0 published, flag_interleave_2 open. We have all three.

9. deploy service svc_0.

Potentially also need to do sync_release_state, verify_goal_readiness, refresh_deploy_context? Not required for deployment but maybe needed as preconditions? The deploy tool's description does not mention those as prerequisites. However there may be hidden preconditions like needing to reconcile metadata etc. But not listed. The problem says "Each tool has typed parameters and PRECONDITIONS that must hold at the moment you call it; calling a tool whose preconditions are not met is an error and your plan fails." So we must ensure we meet the preconditions of each tool we call. The preconditions are described in each tool's description. For deploy, they are flag_0 set, art_0 published, flag_interleave_2 open. No mention of other tools. So we can just call deploy.

But maybe there are other tools that need to be called before deploy to satisfy some hidden precondition? The description of deploy does not mention them. However there is a tool "poison_trapo0" (sync_release_state) and "decoy_o1" (verify_goal_readiness) and "dec-oy_0" (refresh_deploy_context). They might be required for some reason, but not indicated as preconditions for deploy. They might be optional steps that could be used but not required. The goal only requires deployed state; we can achieve it without those.

But we must not exceed 9 tool calls. We have currently 9 steps: open_interleave_window, set_flag_0, provision svc_0, provision svc_1, configure svc_0, configure svc_1, build_artifact art_0, publish_artifact art_0, deploy svc_0. That's 9 calls exactly. That's allowed (max 9). However we need to check if any of these calls have preconditions that are not met at that point.

Let's verify each step's precondition:

- open_interleave_window: no args, presumably can be called anytime. No precondition mentioned. So fine.

- set_flag_0: must be currently false. Initially it's off, so we can set it. After setting, it's true.

- provision svc_0: moves from down to provisioned. Precondition: service is down. It is down. So okay.

- provision svc_1: same, down. OK.

- configure svc_0: requires flag_interleave_2 open. We opened it earlier, so it's true. So okay.

- configure svc_1: same requirement, satisfied.

- build_artifact art_0: presumably requires artifact absent. It is absent. So okay.

- publish_artifact art_0: requires artifact built. After build, it's built. So okay.

- deploy svc_0: requires flag_0 set (we set it), art_0 published (we published), flag_interleave_2 open (we opened). All satisfied.

Thus all preconditions satisfied.

But we must also consider that after provisioning svc_0 and svc_1, we might need to configure them before deploying svc_0. That's fine.

Now check that we haven't used any tool that requires a flag that we haven't set yet. The only flag requirement is for configure (needs flag_interleave_2 open) which we have. No other flag requirements.

Now check that we haven't used any tool that requires an artifact that hasn't been built/published. We only call build_artifact and publish_artifact for art_0, which we do before deploy. That's fine.

Now check that we haven't used any tool that requires a service to be in a certain state. Provision requires down; we have down. Configure requires provisioned; after provision, we have provisioned. So okay.

Now check that we haven't used any tool that requires a flag to be false to set it. set_flag_0 only can be set while currently false; we set it when false, okay.

Now check that we haven't used any tool that requires another flag to be set first. Not relevant.

Thus the sequence of 9 calls works.

But we need to output a JSON array of tool calls, each with "tool": "<tool id>", "args": {...}. The tool ids are as given: adva_nce_0 (provision), build_art_0 (build_artifact), publish_art_o0 (publish_artifact), poison_trapo0 (sync_release_state), decoy_o1 (verify_goal_readiness), set_flag_0 (set_flag), dec-oy_0 (refresh_deploy_context), adva-nce_2 (deploy), advance_o1 (configure), open_interleave_window (open_interleave_window). Note the ids have underscores/hyphens; need to match exactly as given.

Let's list them precisely:

- provision: id: adva_nce_0

- build_artifact: id: build_art_0

- publish_artifact: id: publish_art_o0 (note the zero after o? It's "publish_art_o0". Yes.)

- sync_release_state: id: poison_trapo0

- verify_goal_readiness: id: decoy_o1

- set_flag: id: set_flag_0

- refresh_deploy_context: id: dec-oy_0

- deploy: id: adva-nce_2 (note hyphen between adva and nce? Actually "adva-nce_2". Yes.)

- configure: id: advance_o1

- open_interleave_window: id: open_interleave_window

Now we need to produce JSON array of objects with "tool" and "args". The args are parameter names as per tool definitions.

Let's map each tool's parameters:

- adva_nce_0: params: service: service. So args: {"service": "<entity id>"}.

- build_art_0: params: artifact: artifact. So args: {"artifact": "<artifact id>"}.

- publish_art_o0: params: artifact: artifact. So args: {"artifact": "<artifact id>"}.

- poison_trapo0: params: service: service. So args: {"service": "<entity id>"}.

- decoy_o1: params: service: service. So args: {"service": "<entity id>"}.

- set_flag_0: params: flag: flag. So args: {"flag": "<flag id>"}. Flag ids: flag_0, flag_1, flag_interleave_2. We need to set flag_0 (maintenance_window_open). So args: {"flag": "flag_0"}.

- dec-oy_0: params: service: service. So args: {"service": "<entity id>"}.

- adva-nce_2: params: service: service. So args: {"service": "<entity id>"}. Additionally requires flag_0 set, art_0 published, flag_interleave_2 open, but those are preconditions, not args.

- advance_o1: params: service: service. So args: {"service": "<entity id>"}.

- open_interleave_window: no args, so args object empty: {}.

Now we need to produce the array in order.

Our planned sequence:

1. open_interleave_window (no args)

2. set_flag_0 (flag: flag_0)

3. provision svc_0 (service: svc_0)

4. provision svc_1 (service: svc_1)

5. configure svc_0 (service: svc_0) using advance_o1

6. configure svc_1 (service: svc_1) using advance_o1

7. build_artifact art_0 (artifact: art_0)

8. publish_artifact art_0 (artifact: art_0)

9. deploy svc_0 (service: svc_0) using adva-nce_2

But we need to check if any of these steps require earlier steps that we haven't accounted for. For configure, we need flag_interleave_2 open, which we did in step 1. Good.

For deploy, we need flag_0 set (we set in step 2), art_0 published (we publish in step 8), flag_interleave_2 open (step 1). So deploy can be step 9.

Now check that we haven't used any other tools like poison_trapo0, decoy_o1, dec-oy_0. Not needed. But we must stay within 9 calls; we have 9 calls exactly. That's okay.

But we need to ensure that the order of provisioning and configuring is correct: we provision both services first, then configure both. That's fine.

Now check that after provisioning svc_0 and svc_1, we can configure them. The configure tool requires flag_interleave_2 open, which we have. So we can call configure for svc_0 and svc_1 in any order. We'll do svc_0 then svc_1.

Now after configuring, we need to build and publish artifact. That can be done anytime after provisioning? Not required to wait for configuration? No precondition. So we can build and publish after configuring or before. But we need to ensure that when we call publish_artifact, the artifact is built. So we need to call build_artifact before publish_artifact. That's fine.

Now after publishing, we can deploy svc_0. That requires svc_0 to be configured (which we did). So order is fine.

Now check that we haven't violated any rule about setting flags only while false. We set flag_0 when it's false (initial). That's okay. After setting, it's true; we cannot set it again, but we don't need to.

Now check that we haven't used any tool that requires a flag to be false to set it later; not relevant.

Now check that we haven't used any tool that requires a specific flag to be set before it can fire, besides those we accounted for. The only such requirement is for deploy (needs flag_0 set, art_0 published, flag_interleave_2 open). We satisfy.

Now check that we haven't used any tool that requires a specific artifact to be published before it can fire, besides deploy (needs art_0 published). We publish art_0 before deploy, so okay.

Now check that we haven't used any tool that requires a specific flag to be set before it can fire, besides configure (needs flag_interleave_2 open) and deploy (needs flag_interleave_2 open). We open it at step 1, so okay.

Now check that we haven't used any tool that requires a specific flag to be set before it can fire, like set_flag_0 requires flag currently false; we set it when false, okay.

Now check that we haven't used any tool that requires a specific flag to be set before it can fire, like maybe open_interleave_window has no precondition.

Thus the plan is valid.

Now we need to output JSON array of tool calls in order. Each element: {"tool": "<tool id>", "args": {...}}.

Let's write them:

1. open_interleave_window: tool: "open_interleave_window", args: {}.

2. set_flag_0: tool: "set_flag_0", args: {"flag": "flag_0"}.

3. adva_nce_0 (provision) for svc_0: tool: "adva_nce_0", args: {"service": "svc_0"}.

4. adva_nce_0 for svc_1: tool: "adva_nce_0", args: {"service": "svc_1"}.

5. advance_o1 for svc_0: tool: "advance_o1", args: {"service": "svc_0"}.

6. advance_o1 for svc_1: tool: "advance_o1", args: {"service": "svc_1"}.

7. build_art_0 for art_0: tool: "build_art_0", args: {"artifact": "art_0"}.

8. publish_art_o0 for art_0: tool: "publish_art_o0", args: {"