Record a1d2db989ab840a78cd878c18f0711f1

We need to produce a sequence of tool calls achieving:

Goal: registry-0 (svc_0) must be at least deployed. So we need to go through states: down->provisioned->configured->deployed.

Registry-1 (svc_1) must be at least configured: so down->provisioned->configured.

Constraints: For each step there are prerequisites per tool definitions.

Let's list all tools with their names and IDs:

- dec_oy_1: sync_release_state (service). No other constraints? Probably none besides maybe needing something else but not mentioned. It says reconciles registry-0's deployment metadata before rollout. Likely no precondition beyond being called on a service? Not sure if needs anything else. We'll assume it can be called anytime.

- publish_art_o0: publish_artifact (artifact). Precondition: artifact must be built? Actually generic rule: artifact can only be published once it has been built. So we need to have built artifact first via build_art_0.

- set_-flag_0: set_flag (flag). Sets flag_0 to true. Flag can only be set while it is currently false. Also possibly requires nothing else.

- poison_trapo0: sync_release_state (service). Same as dec_oy_1? Another similar tool.

- adva_nce_0: provision (service). Moves service from down to provisioned. No extra requirements listed.

- dec_oy_0: refresh_deploy_context (service). Possibly needed before deploying? Might be required? Not specified.

- build_art_0: build_artifact (artifact). Builds artifact from absent to built.

- adva-nce_2: deploy (service). Deploys service from configured to deployed. Requires flag_0 set, artifact art_0 published, flag_interleave_2 window flag open.

- advance_o1: configure (service). Configures service from provisioned to configured. Requires flag_interleave_2 window flag open.

- open_interleave_window: opens flag_interleave_2.

Thus to get services to desired states, we need to ensure certain flags/artifacts etc.

Specifically:

For configuring any service (advance_o1) we need flag_interleave_2 open.

For deploying any service (adva-nce_2) we need flag_0 set, artifact art_0 published, and flag_interleave_2 open.

Thus we need to:

- Open interleaving window: open_interleave_window (no args).

- Set flag_0: set_-flag_0 (flag: flag_0).

- Build artifact: build_art_0 (artifact: art_0).

- Publish artifact: publish_art_o0 (artifact: art_0).

Now we also need to provision both services, then configure them, then deploy registry-0.

Sequence possibilities:

Start: All services down, artifacts absent, flags false.

Step 1: open_interleave_window.

Step 2: set_-flag_0.

Step 3: build_art_0.

Step 4: publish_art_o0.

Now we have flags and artifact ready.

Provision services:

Step 5: adva_nce_0 (service: svc_0) // provision registry-0.

Step 6: adva_nce_0 (service: svc_1) // provision registry-1.

Configure services (need interleaved window open - already done):

Step 7: advance_o1 (service: svc_0) // configure registry-0.

Step 8: advance_o1 (service: svc_1) // configure registry-1.

Deploy registry-0 (needs flag_0 set, artifact published, interleaved window open - all satisfied):

Step 9: adva-nce_2 (service: svc_0) // deploy registry-0.

That uses 9 tool calls exactly max allowed.

Check ordering: after provisioning, we could also run sync_release_state tools? Not needed.

But note: There might be requirement that before configuring we need to have performed sync_release_state? Not indicated. However there are two sync_release_state tools: dec_oy_1 and poison_trapo0. They might be needed for registry-0 deployment metadata reconciliation before rollout. But not stated as precondition for any step. Could be optional. Since we have limit 9, we used exactly 9 without them. Should be fine.

Double-check each tool's preconditions:

- open_interleave_window: no args, presumably always allowed.

- set_-flag_0: flag currently false (true initially false). OK.

- build_art_0: artifact absent initially, so can build.

- publish_art_o0: artifact must be built; we just built it, ok.

- adva_nce_0 (provision): service must be down. Both are down initially. After provisioning svc_0, it becomes provisioned; svc_1 still down. Then second provision works on svc_1 (still down). Good.

- advance_o1 (configure): requires flag_interleave_2 open (we opened). Also service must be provisioned (since moving from provisioned to configured). After provisioning both, they are provisioned. Good.

- adva-nce_2 (deploy): requires flag_0 set (yes), artifact art_0 published (yes), flag_interleave_2 open (yes). Service must be configured (moving from configured to deployed). After configuring both, svc_0 is configured, svc_1 configured. So deploy svc_0 works.

Thus final state: svc_0 deployed, svc_1 configured (at least configured). Goal satisfied.

All good.

Now output JSON array with objects: {"tool":"<tool id>", "args":{...}}.

Tool IDs exactly as given: open_interleave_window, set_-flag_0, build_art_0, publish_art_o0, adva_nce_0 (twice), advance_o1 (twice), adva-nce_2.

Note hyphens and underscores: need to match exactly.

List:

1. {"tool":"open_interleave_window","args":{}}
2. {"tool":"set_-flag_0","args":{"flag":"flag_0"}}
3. {"tool":"build_art_0","args":{"artifact":"art_0"}}
4. {"tool":"publish_art_o0","args":{"artifact":"art_0"}}
5. {"tool":"adva_nce_0","args":{"service":"svc_0"}}
6. {"tool":"adva_nce_0","args":{"service":"svc_1"}}
7. {"tool":"advance_o1","args":{"service":"svc_0"}}
8. {"tool":"advance_o1","args":{"service":"svc_1"}}
9. {"tool":"adva-nce_2","args":{"service":"svc_0"}}

Check naming: adva-nce_2 includes a hyphen between adva and nce? Actually given: "adva-nce_2". Yes.

Make sure JSON is valid.

Return only JSON array.