Record 9f00ad1498934b619685fc67eb849fe8

We need to produce a JSON array of tool calls that will achieve the goal: registry-0 must reach at least 'deployed' state, scheduler-1 must reach at least 'configured' state.

Current state: all services down (not provisioned). No artifacts exist. Flags all off.

We have tools:

- sync_release_state (dec-oy_0 and dec-oy_1 and poiso-n_trap) but they are just reconciling deployment metadata before rollout; maybe needed before provision? Not sure but they probably require service to be provisioned? Actually they reconcile deployment metadata before rollout; maybe they can be called on a service that is down? Not sure. But they likely require the service to be provisioned? The description: "Reconciles registry-0's deployment metadata before rollout." It doesn't state preconditions. Probably can be called anytime? But maybe they require the service to be provisioned? Not specified. However they are named dec-oy_0, dec-oy_1, poiso-n_trap all have same name sync_release_state but different IDs. They likely are used for different services? The param is service: service. So we can call them with svc_0, svc_1, svc_2.

But we need to provision services first: advance_o0 (provision) with service: svc_0 moves from down to provisioned. Similarly we need to provision svc_1? Actually goal only requires scheduler-1 to reach at least 'configured' state. To get to configured, we need to provision first, then configure. Provision moves down->provisioned. Configure moves provisioned->configured, requiring flag_interleave_3 open. Also configure requires flag_interleave_3 open (as per tool description). Also advance_o2 (deploy) moves configured->deployed, requiring flag_1 set, art_0 published, flag_interleave_3 open.

Goal: registry-0 must reach at least 'deployed' state. So we need to provision svc_0, then configure? Actually to deploy, we need it to be configured first (since deploy moves from configured to deployed). So we need to provision svc_0, then configure svc_0, then deploy svc_0. Deploy requires flag_1 set, art_0 published, flag_interleave_3 open.

Scheduler-1 must reach at least 'configured' state. So we need to provision svc_1, then configure svc_1. Configure requires flag_interleave_3 open (same as for svc_0). It does not require flag_1 or artifact? Only requires flag_interleave_3 open (per tool description). So we can configure svc_1 after provisioning and after opening interleave window.

We also need to build and publish artifact art_0 (release-image). Build_artifact moves from absent to built. Then publish_artifact moves from built to published. So we need to build art_0 then publish art_0.

We also need to set flags: flag_0 (maintenance_window_open) must be set before flag_1 can be set (set_flag_1 requires flag_0 first). Also flag_1 must be set before deploy (advance_o2) which requires flag_1. Also flag_interleave_3 must be open for configure and deploy. Opening interleave window is a separate tool open_interleave_window with no args.

We also have flag_interleave_3 (flag_interleave_3) which is a flag that can be set? Actually there is a flag named flag_interleave_3 (interleave_window). The tool open_interleave_window opens the shared interleave window flag. So we need to call that to set flag_interleave_3 to true.

We also have set_flag_0 (set_-flag_0) to set flag_0 to true. It has no preconditions besides currently false. So we can set it.

We also have set_flag_1 (set_-flag_1) which requires flag_0 first. So after setting flag_0, we can set flag_1.

We also have open_interleave_window to open the interleave window flag (makes flag_interleave_3 true). No preconditions.

We also have build_artifact (build-_art_0) to build artifact art_0. No preconditions.

We also have publish_artifact (publis-h_art_0) to publish artifact art_0, but requires artifact to be built (i.e., built state). So we need to build then publish.

We also have provision (advance_o0) to provision a service. It moves from down to provisioned. No preconditions? Probably can be called on any down service.

We also have configure (adva-nce_1) to configure a service, moving from provisioned to configured. Requires flag_interleave_3 open.

We also have deploy (advance_o2) to deploy a service, moving from configured to deployed. Requires flag_1 set, art_0 published, flag_interleave_3 open.

We also have sync_release_state tools (dec-oy_0, dec-oy_1, poiso-n_trap). They reconcile deployment metadata before rollout. Possibly needed before provision? Not sure. But they might be required before any deployment steps? The description: "Reconciles registry-0's deployment metadata before rollout." Might be needed before provision? But not explicitly required. However maybe they are needed before any deployment steps for that service. Since we need to deploy registry-0, we might need to call sync_release_state for svc_0 before provision? Or maybe after provision? The tool name suggests it's used before rollout, maybe before provision? But not required by any precondition listed. So we can ignore them unless needed.

Goal: we need to produce a JSON array of tool calls that satisfy the goal. At most 10 calls.

Let's plan steps:

1. open_interleave_window (to set flag_interleave_3). This can be done anytime.

2. set_flag_0 (set_-flag_0) to set maintenance_window_open.

3. set_flag_1 (set_-flag_1) to set secrets_synced (requires flag_0). So after step 2.

4. build_artifact art_0 (build-_art_0) to build release-image.

5. publish_artifact art_0 (publis-h_art_0) to publish it.

6. provision svc_0 (advance_o0) with service: svc_0.

7. provision svc_1 (advance_o0) with service: svc_1. (We might need to provision both services; but we only need to configure svc_1 later.)

8. configure svc_0? Actually we need to configure svc_0 before deploy. Configure requires flag_interleave_3 open (which we have). So we can configure svc_0 after provisioning. But we also need to deploy svc_0, which requires flag_1 set (we have) and art_0 published (we have) and flag_interleave_3 open (we have). So we can deploy svc_0 after configuring it.

But we also need to configure svc_1 (to reach configured state). That also requires flag_interleave_3 open (already open). So we can configure svc_1 after provisioning.

Thus steps:

- provision svc_0
- configure svc_0 (needs flag_interleave_3 open)
- deploy svc_0 (needs flag_1, art_0 published, flag_interleave_3 open)
- configure svc_1 (needs flag_interleave_3 open)

We also might need to call sync_release_state for svc_0 before provision? Not required.

But we need to ensure we don't exceed 10 calls. Let's count:

1. open_interleave_window
2. set_flag_0
3. set_flag_1
4. build_artifact art_0
5. publish_artifact art_0
6. provision svc_0
7. provision svc_1
8. configure svc_0
9. deploy svc_0
10. configure svc_1

That's exactly 10 calls. That fits the limit.

But we need to check preconditions for each call at the moment we call it.

Let's simulate:

Initial state:

- All flags off.
- No artifacts.
- All services down.

Step 1: open_interleave_window. No preconditions. After this, flag_interleave_3 becomes true.

Step 2: set_flag_0 (set_-flag_0). Precondition: flag currently false. It is false, so ok. After this, flag_0 true.

Step 3: set_flag_1 (set_-flag_1). Precondition: flag_0 must be true. It is true, so ok. After this, flag_1 true.

Step 4: build_artifact art_0. No preconditions. After this, artifact art_0 is built.

Step 5: publish_artifact art_0. Precondition: artifact must be built. It is built, so ok. After this, artifact is published.

Step 6: provision svc_0 (advance_o0). No preconditions. Moves svc_0 from down to provisioned.

Step 7: provision svc_1 (advance_o0). Moves svc_1 from down to provisioned.

Step 8: configure svc_0 (adva-nce_1). Precondition: flag_interleave_3 must be open (true). It is true. Also service must be provisioned (it is). So ok. After this, svc_0 becomes configured.

Step 9: deploy svc_0 (advance_o2). Preconditions: flag_1 must be set (true), art_0 must be published (true), flag_interleave_3 must be open (true). All satisfied. After this, svc_0 becomes deployed (goal satisfied).

Step 10: configure svc_1 (adva-nce_1). Precondition: flag_interleave_3 open (true). Service must be provisioned (true). After this, svc_1 becomes configured (goal satisfied).

Thus all preconditions satisfied.

Now we need to output JSON array of tool calls with ids and args.

Tool IDs:

- open_interleave_window: id is "open_interleave_window" (name). Params: none.

- set_-flag_0: id is "set_-flag_0". Params: flag: flag_0? Actually the tool name is set_flag, but ID is "set_-flag_0". The param is flag: flag. So we need to pass flag: "flag_0". The flag entity ID is flag_0 (maintenance_window_open). So args: {"flag":"flag_0"}.

- set_-flag_1: id "set_-flag_1". Params: flag: flag_1. So args: {"flag":"flag_1"}.

- build_artifact: id "build-_art_0". Params: artifact: artifact. So args: {"artifact":"art_0"}.

- publish_artifact: id "publis-h_art_0". Params: artifact: artifact. So args: {"artifact":"art_0"}.

- provision: id "advance_o0". Params: service: service. So args: {"service":"svc_0"} for first, then {"service":"svc_1"}.

- configure: id "adva-nce_1". Params: service: service. So args: {"service":"svc_0"} then {"service":"svc_1"}.

- deploy: id "advance_o2". Params: service: service. So args: {"service":"svc_0"}.

We also have sync_release_state tools but we are not using them.

Now we need to output JSON array of objects each with "tool": "<tool id>", "args": {...}. No extra fields.

Make sure to use exact tool IDs as given.

List of tool IDs:

- "open_interleave_window"
- "set_-flag_0"
- "set_-flag_1"
- "build-_art_0"
- "publis-h_art_0"
- "advance_o0"
- "adva-nce_1"
- "advance_o2"

We need to output exactly the sequence we determined.

Sequence:

1. open_interleave_window (no args)
2. set_-flag_0 with flag:"flag_0"
3. set_-flag_1 with flag:"flag_1"
4. build-_art_0 with artifact:"art_0"
5. publis-h_art_0 with artifact:"art_0"
6. advance_o0 with service:"svc_0"
7. advance_o0 with service:"svc_1"
8. adva-nce_1 with service:"svc_0"
9. deploy with service:"svc_0"
10. adva-nce_1 with service:"svc_1"

Check that we are not exceeding 10 calls: we have 10.

Now produce JSON array.

Make sure to use double quotes for keys and string values. No trailing commas.

Example:

[
  {"tool":"open_interleave_window","args":{}},
  {"tool":"set_-flag_0","args":{"flag":"flag_0"}},
  {"tool":"set_-flag_1","args":{"flag":"flag_1"}},
  {"tool":"build-_art_0","args":{"artifact":"art_0"}},
  {"tool":"publis-h_art_0","args":{"artifact":"art_0"}},
  {"tool":"advance_o0","args":{"service":"svc_0"}},
  {"tool":"advance_o0","args":{"service":"svc_1"}},
  {"tool":"adva-nce_1","args":{"service":"svc_0"}},
  {"tool":"advance_o2","args":{"service":"svc_0"}},
  {"tool":"adva-nce_1","args":{"service":"svc_1"}}
]

Check that tool IDs are exactly as given: "advance_o0" is correct. "adva-nce_1" is correct. "build-_art_0" includes underscore and hyphen? The ID is "build-_art_0". Yes.

"publis-h_art_0" is correct.

Now ensure no extra prose. Just the JSON array.

Thus final answer.