Record 8ad1afb6b9e14bcf8c9dca8e94f28553

We need to produce a JSON array of tool calls that will achieve the goal: reporting-0 must reach at least 'deployed' state, gateway-1 must reach at least 'configured' state.

Current state: all services down (not provisioned). release-image artifact does not exist. db-migration artifact does not exist. maintenance_window_open flag is off. secrets_synced flag is off. flag_interleave_2 is off (presumably). Also need to consider flags requirements.

Tools:

- build_art_0: builds release-image artifact (artifact: art_0). Moves from absent to built.

- set_flag_0: set flag_0 (maintenance_window_open) to true.

- poiso_n_trap (sync_release_state) with service: service (presumably for reporting-0). There are two similar tools: dec_oy_1 (confirm_service_target) and dec-oy_0 (sync_release_state). Both take service param. They likely are used to reconcile deployment metadata ahead of rollout. Might be needed before provisioning? Not sure.

- publish_art_o0: publish artifact (art_0) from built to published.

- provision (adva_nce_0): provision service (svc_0) from down to provisioned.

- configure (adva_nce_1): configure service (svc_0?) from provisioned to configured. Requires flag_interleave_2 open.

- deploy (adva_nce_2): deploy service (svc_0?) from configured to deployed. Requires flag_0 (maintenance_window_open) set, art_0 published, flag_interleave_2 open.

- open_interleave_window: opens flag_interleave_2.

Goal: reporting-0 must reach at least 'deployed' state. That means we need to go through provision -> configure -> deploy. So we need to provision, configure, then deploy. Provision requires service down -> provisioned; configure requires provisioned -> configured; deploy requires configured -> deployed, plus preconditions: flag_0 set, art_0 published, flag_interleave_2 open.

Gateway-1 must reach at least 'configured' state. That means we need to provision and configure it, but not necessarily deploy. So we need to provision gateway-1 (svc_1) and then configure it. Configure also requires flag_interleave_2 open (same flag). So we need to open the interleave window flag before configuring any service that requires it. The provision step does not require any flag; just provision.

But we also have flags: maintenance_window_open (flag_0) must be set for deploy. secrets_synced (flag_1) maybe not needed? Not mentioned in preconditions for any tool; maybe irrelevant.

We also have artifact db-migration (art_1) not needed? Not referenced in any tool preconditions; maybe not needed.

We need to build release-image artifact (art_0) first, then publish it, then later use it for deploy.

Sequence:

1. build_art_0 (artifact: art_0) -> now artifact built.

2. publish_art_o0 (artifact: art_0) -> now published.

3. open_interleave_window -> sets flag_interleave_2 to true.

Now we can configure services that require flag_interleave_2 open. Both configure (adva_nce_1) and deploy (adva_nce_2) require flag_interleave_2 open. Also deploy requires flag_0 set (maintenance_window_open). So we need to set flag_0 (set_flag_0) before deploy.

Also we need to provision services first: provision (adva_nce_0) for each service.

Thus steps:

- provision svc_0 (reporting-0) -> moves to provisioned.

- provision svc_1 (gateway-1) -> moves to provisioned.

Now configure them: configure svc_0 and configure svc_1. Both require flag_interleave_2 open, which we have opened.

But note: configure tool name is adva_nce_1, requires service param. So we can call configure for each service.

After configuring, we need to deploy reporting-0: deploy svc_0. Preconditions: flag_0 set, art_0 published, flag_interleave_2 open. We have all: flag_0 not yet set, but we can set it now. Also need flag_interleave_2 open (already open). So set flag_0 (set_flag_0) then deploy svc_0.

Thus overall plan:

1. build_art_0 (artifact: art_0)

2. publish_art_o0 (artifact: art_0)

3. open_interleave_window

4. provision svc_0

5. provision svc_1

6. configure svc_0

7. configure svc_1

8. set_flag_0 (flag_0)

9. deploy svc_0

We have 9 steps, within limit of 9. Need to ensure each tool's preconditions are met at time of call.

Check each:

- build_art_0: no preconditions; artifact absent -> built. OK.

- publish_art_o0: requires artifact built. After step 1, artifact built, so step 2 ok.

- open_interleave_window: no args, opens flag_interleave_2. No preconditions. OK.

- provision svc_0: moves down->provisioned. No preconditions. OK.

- provision svc_1: same. OK.

- configure svc_0: requires flag_interleave_2 open. After step 3, it's open. So ok.

- configure svc_1: same requirement. OK.

- set_flag_0: set flag_0 to true. No preconditions (can only set while false). It's currently off, so ok.

- deploy svc_0: requires flag_0 set, art_0 published, flag_interleave_2 open. All satisfied after steps 2,3,8. So ok.

Thus sequence works.

Now we need to output JSON array of tool calls with exact ids and args.

Tool ids:

- build_art_0

- publish_art_o0 (note the id is "publish_art_o0"? In catalog: "id: publish_art_o0 | name: publish_artifact | params: artifact: artifact". So id is "publish_art_o0". Yes.

- open_interleave_window (id: open_interleave_window)

- adva_nce_0 (provision) (id: adva_nce_0)

- adva_nce_1 (configure) (id: adva_nce_1)

- set_flag_0 (id: set_flag_0)

- adva_nce_2 (deploy) (id: adva_nce_2)

We also have "dec_oy_1" and "dec-oy_0" but not needed.

Thus array:

[
  {"tool":"build_art_0","args":{"artifact":"art_0"}},
  {"tool":"publish_art_o0","args":{"artifact":"art_0"}},
  {"tool":"open_interleave_window","args":{}},
  {"tool":"adva_nce_0","args":{"service":"svc_0"}},
  {"tool":"adva_nce_0","args":{"service":"svc_1"}},
  {"tool":"adva_nce_1","args":{"service":"svc_0"}},
  {"tool":"adva_nce_1","args":{"service":"svc_1"}},
  {"tool":"set_flag_0","args":{"flag":"flag_0"}},
  {"tool":"adva_nce_2","args":{"service":"svc_0"}}
]

Check that we used at most 9 calls: we have 9 calls.

Make sure parameter names exactly as expected: For build_art_0, param is "artifact". For publish_art_o0, param is "artifact". For open_interleave_window, no args (empty object). For adva_nce_0, param is "service". For adva_nce_1, param is "service". For set_flag_0, param is "flag". For adva_nce_2, param is "service".

Thus final JSON array.

One nuance: The tool "publish_artifact" id is "publish_art_o0". Yes.

Thus output exactly that JSON array, no extra text.