Record 5f2666fdad69459fb2de5fdf3dad4ff9

We need to produce a sequence of tool calls leading to auth-api-0 being healthy. Let's parse initial state:

- Services: both down (svc_0 auth-api-0, svc_1 search-1) -> status down.
- Artifacts: none built/published.
- Flags all false? Many flags repeated but essentially all false initially.

Goal: service auth-api-0 must be at least healthy.

To get healthy we need to run health-check tool (advance_o3) which moves service from deployed to healthy, precondition: service must be currently deployed, requires depth_flag_15 flag set, requires art_0 artifact published.

Thus steps needed:

1. Get auth-api-0 from down → provisioned via adva-nce_0 (provision) with service param = svc_0.
   Precondition: service must be down (true).

2. Then configured via adva_nce_1 (configure) moving from provisioned to configured. Precondition: service must be provisioned.

3. Then deployed via adva_nce_2 (deploy) moving from configured to deployed. Precondition: service must be configured.

Now after step 3, service is deployed.

But also need depth_flag_15 set and art_0 published before health-check.

So we need to build artifact art_0 then publish it.

Build artifact: build_art_o0 (build_artifact) with artifact=art_0. Precondition: artifact absent (true). Moves to built.

Publish artifact: publish_art_o0 (publish_artifact) with artifact=art_0. Precondition: artifact built (true). Moves to published.

Now need depth_flag_15 set. Depth flags chain: many dependencies.

Let's list depth flags and their prerequisites as per tool definitions:

depth_flag_0: set by set_dep_th_flag_0 (requires flag_0 first)
depth_flag_1: set by set_depth_flag_o1 (requires depth_flag_0)
depth_flag_2: set by set_dep-th_flag_2 (requires depth_flag_1)
depth_flag_3: set by set_dep-th_flag_3 (requires depth_flag_2)
depth_flag_4: set by set_depth_flag_o4 (requires depth_flag_3)
depth_flag_5: set by set_dep-th_flag_5 (requires depth_flag_4)
depth_flag_6: set by set_depth_flag_o6 (requires depth_flag_5)
depth_flag_7: set by set_dep_th_flag_7 (requires depth_flag_6)
depth_flag_8: set by set_dep-th_flag_8 (requires depth_flag_7)
depth_flag_9: set by set_depth_flag_o9 (requires depth_flag_8)
depth_flag_10: set by set_dep-th_flag_10 (requires depth_flag_9)
depth_flag_11: set by set_dep_th_flag_11 (requires depth_flag_10)
depth_flag_12: set by set_depth_flag_o12 (requires depth_flag_11)
depth_flag_13: set by set_depth_flag_o13 (requires depth_flag_12)
depth_flag_14: set by set_depth_flag_o14 (requires depth_flag_13)
depth_flag_15: set by set_dep_th_flag_15 (requires depth_flag_14)

Also there are other flags like flag_0 etc.

flag_0: set by set_flag_o0 (no prerequisite? It says precondition: it must currently be false.)

Other flags: maybe some duplicates but ignore.

Thus to set depth_flag_15 we need to sequentially set each preceding flag starting from flag_0 up through depth flags.

Specifically:

- Need flag_0 true (set_flag_o0)
- Then depth_flag_0 (set_dep_th_flag_0) requiring flag_0.
- Then depth_flag_1 (set_depth_flag_o1) requiring depth_flag_0.
- Then depth_flag_2 (set_dep-th_flag_2) requiring depth_flag_1.
- Then depth_flag_3 (set_dep-th_flag_3) requiring depth_flag_2.
- Then depth_flag_4 (set_depth_flag_o4) requiring depth_flag_3.
- Then depth_flag_5 (set_dep-th_flag_5) requiring depth_flag_4.
- Then depth_flag_6 (set_depth_flag_o6) requiring depth_flag_5.
- Then depth_flag_7 (set_dep_th_flag_7) requiring depth_flag_6.
- Then depth_flag_8 (set_dep-th_flag_8) requiring depth_flag_7.
- Then depth_flag_9 (set_depth_flag_o9) requiring depth_flag_8.
- Then depth_flag_10 (set_dep-th_flag_10) requiring depth_flag_9.
- Then depth_flag_11 (set_dep_th_flag_11) requiring depth_flag_10.
- Then depth_flag_12 (set_depth_flag_o12) requiring depth_flag_11.
- Then depth_flag_13 (set_depth_flag_o13) requiring depth_flag_12.
- Then depth_flag_14 (set_depth_flag_o14) requiring depth_flag_13.
- Then depth_flag_15 (set_dep_th_flag_15) requiring depth_flag_14.

That's a long chain: total number of set_flag calls: 1 (flag_0) + 16 depth flags = 17.

Additionally we have provision/configure/deploy (3), build artifact (1), publish artifact (1), health-check (1). So total ~23 calls, within limit 46.

Need to ensure ordering respects preconditions.

Let's outline steps:

1. set_flag_o0 (flag_0) - sets flag_0 true.
2. set_dep_th_flag_0 (depth_flag_0) - needs flag_0.
3. set_depth_flag_o1 (depth_flag_1) - needs depth_flag_0.
4. set_dep-th_flag_2 (depth_flag_2) - needs depth_flag_1.
5. set_dep-th_flag_3 (depth_flag_3) - needs depth_flag_2.
6. set_depth_flag_o4 (depth_flag_4) - needs depth_flag_3.
7. set_dep-th_flag_5 (depth_flag_5) - needs depth_flag_4.
8. set_depth_flag_o6 (depth_flag_6) - needs depth_flag_5.
9. set_dep_th_flag_7 (depth_flag_7) - needs depth_flag_6.
10. set_dep-th_flag_8 (depth_flag_8) - needs depth_flag_7.
11. set_depth_flag_o9 (depth_flag_9) - needs depth_flag_8.
12. set_dep-th_flag_10 (depth_flag_10) - needs depth_flag_9.
13. set_dep_th_flag_11 (depth_flag_11) - needs depth_flag_10.
14. set_depth_flag_o12 (depth_flag_12) - needs depth_flag_11.
15. set_depth_flag_o13 (depth_flag_13) - needs depth_flag_12.
16. set_depth_flag_o14 (depth_flag_14) - needs depth_flag_13.
17. set_dep_th_flag_15 (depth_flag_15) - needs depth_flag_14.

After this depth_flag_15 true.

Provisioning path can happen interleaved; doesn't depend on flags except health-check later needing depth_flag_15 and artifact published.

Thus we could do provision/configure/deploy earlier while building flags, but they don't require those flags. However note that health-check also requires art_0 published. So we need to build and publish artifact before health-check.

Thus final steps after flags done and artifact ready:

- Build artifact: build_art_o0 (artifact abs->built)
- Publish artifact: publish_art_o0 (built->published)
- Provision auth-api-0: adva-nce_0 (provision) service svc_0
- Configure: adva_nce_1 (configure) service svc_0
- Deploy: adva_nce_2 (deploy) service svc_0
- Health-check: advance_o3 (health-check) service svc_0

Check preconditions:

- For provision: service down (yes initially)
- After provision, service becomes provisioned.
- Configure: service provisioned (yes)
- Deploy: service configured (yes)
- Health-check: service deployed (yes after deploy), depth_flag_15 true (we will have set earlier), art_0 published (we will have built/published earlier). Good.

Potential conflict: If we do provision/configure/deploy before building artifact, that's fine because health-check later checks artifact published; if we haven't published yet, health-check would fail. So we need to ensure artifact published before health-check. We can do build/publish either before or after provisioning as long as before health-check.

Simplify: Do all flag setting first, then build/publish artifact, then provision/configure/deploy, then health-check.

Check that after provisioning etc, no other tool changes flags inadvertently? No.

Thus sequence:

1. set_flag_o0
2. set_dep_th_flag_0
3. set_depth_flag_o1
4. set_dep-th_flag_2
5. set_dep-th_flag_3
6. set_depth_flag_o4
7. set_dep-th_flag_5
8. set_depth_flag_o6
9. set_dep_th_flag_7
10. set_dep-th_flag_8
11. set_depth_flag_o9
12. set_dep-th_flag_10
13. set_dep_th_flag_11
14. set_depth_flag_o12
15. set_depth_flag_o13
16. set_depth_flag_o14
17. set_dep_th_flag_15
18. build_art_o0
19. publish_art_o0
20. adva-nce_0 (provision svc_0)
21. adva_nce_1 (configure svc_0)
22. adva_nce_2 (deploy svc_0)
23. advance_o3 (health-check svc_0)

All good.

Double-check tool IDs exactly as given:

List them:

- set_flag_o0 (id: set_flag_o0) name: set_flag, params flag: flag (should be flag_0)
- set_dep_th_flag_0 (id: set_dep_th_flag_0) name: set_flag, params flag: flag (depth_flag_0)
- set_depth_flag_o1 (id: set_depth_flag_o1) name: set_flag, params flag: flag (depth_flag_1)
- set_dep-th_flag_2 (id: set_dep-th_flag_2) name: set_flag, params flag: flag (depth_flag_2)
- set_dep-th_flag_3 (id: set_dep-th_flag_3) name: set_flag, params flag: flag (depth_flag_3)
- set_depth_flag_o4 (id: set_depth_flag_o4) name: set_flag, params flag: flag (depth_flag_4)
- set_dep-th_flag_5 (id: set_dep-th_flag_5) name: set_flag, params flag: flag (depth_flag_5)
- set_depth_flag_o6 (id: set_depth_flag_o6) name: set_flag, params flag: flag (depth_flag_6)
- set_dep_th_flag_7 (id: set_dep_th_flag_7) name: set_flag, params flag: flag (depth_flag_7)
- set_dep-th_flag_8 (id: set_dep-th_flag_8) name: set_flag, params flag: flag (depth_flag_8)
- set_depth_flag_o9 (id: set_depth_flag_o9) name: set_flag, params flag: flag (depth_flag_9)
- set_dep-th_flag_10 (id: set_dep-th_flag_10) name: set_flag, params flag: flag (depth_flag_10)
- set_dep_th_flag_11 (id: set_dep_th_flag_11) name: set_flag, params flag: flag (depth_flag_11)
- set_depth_flag_o12 (id: set_depth_flag_o12) name: set_flag, params flag: flag (depth_flag_12)
- set_depth_flag_o13 (id: set_depth_flag_o13) name: set_flag, params flag: flag (depth_flag_13)
- set_depth_flag_o14 (id: set_depth_flag_o14) name: set_flag, params flag: flag (depth_flag_14)
- set_dep_th_flag_15 (id: set_dep_th_flag_15) name: set_flag, params flag: flag (depth_flag_15)
- build_art_o0 (id: build_art_o0) name: build_artifact, params artifact: artifact (art_0)
- publish_art_o0 (id: publish_art_o0) name: publish_artifact, params artifact: artifact (art_0)
- adva-nce_0 (id: adva-nce_0) name: provision, params service: service (svc_0)
- adva_nce_1 (id: adva_nce_1) name: configure, params service: service (svc_0)
- adva_nce_2 (id: adva_nce_2) name: deploy, params service: service (svc_0)
- advance_o3 (id: advance_o3) name: health-check, params service: service (svc_0)

Make sure naming matches exactly: Some have hyphens vs underscores. Use as given.

Now output JSON array of objects with "tool" and "args". Args: for set_flag tools, param "flag": entity id of flag. Which entity ids correspond?

Given ENTITY IDS list includes many flags with same names duplicated. But we need to use exact ids: They gave list:

Flags: flag_0 (maintenance_window_open), flag_1 (secrets_synced), depth_flag_0 (feature_gate_on), depth_flag_1 (backup_taken), depth_flag_2 (quota_raised), depth_flag_3 (maintenance_window_open), depth_flag_4 (secrets_synced), depth_flag_5 (feature_gate_on), depth_flag_6 (backup_taken), depth_flag_7 (quota_raised), depth_flag_8 (maintenance_window_open), depth_flag_9 (secrets_synced), depth_flag_10 (feature_gate_on), depth_flag_11 (backup_taken), depth_flag_12 (quota_raised), depth_flag_13 (maintenance_window_open), depth_flag_14 (secrets_synced), depth_flag_15 (feature_gate_on), depth_flag_16? Actually they stopped at depth_flag_15? Wait they listed up to depth_flag_15 (feature_gate_on). Yes.

Thus entity IDs:

- flag_0
- flag_1
- depth_flag_0
- depth_flag_1
- depth_flag_2
- depth_flag_3
- depth_flag_4
- depth_flag_5
- depth_flag_6
- depth_flag_7
- depth_flag_8
- depth_flag_9
- depth_flag_10
- depth_flag_11
- depth_flag_12
- depth_flag_13
- depth_flag_14
- depth_flag_15

Note they also had duplicate entries for maintenance_window_open etc but we ignore.

Thus for each set_flag tool we need to specify the flag entity id accordingly.

Mapping:

set_flag_o0 -> flag_0
set_dep_th_flag_0 -> depth_flag_0
set_depth_flag_o1 -> depth_flag_1
set_dep-th_flag_2 -> depth_flag_2
set_dep-th_flag_3 -> depth_flag_3
set_depth_flag_o4 -> depth_flag_4
set_dep-th_flag_5 -> depth_flag_5
set_depth_flag_o6 -> depth_flag_6
set_dep_th_flag_7 -> depth_flag_7
set_dep-th_flag_8 -> depth_flag_8
set_depth_flag_o9 -> depth_flag_9
set_dep-th_flag_10 -> depth_flag_10
set_dep_th_flag_11 -> depth_flag_11
set_depth_flag_o12 -> depth_flag_12
set_depth_flag_o13 -> depth_flag_13
set_depth_flag_o14 -> depth_flag_14
set_dep_th_flag_15 -> depth_flag_15

For build_art_o0: artifact: art_0
publish_art_o0: artifact: art_0
adva-nce_0: service: svc_0
adva_nce_1: service: svc_0
adva_nce_2: service: svc_0
advance_o3: service: svc_0

Now produce JSON array.

Check count: 23 entries.

Let's craft.