Record 5ee58c9dc74d4e4bb1ede3dfbb30ebdc

We need to produce a sequence of tool calls leading to service registry-0 being healthy.

Goal: service 'registry-0' must reach at least the 'healthy' state.

Current state: registry-0 (svc_0) is down (not yet provisioned). So we need to go through states: down -> provisioned -> configured -> deployed -> healthy.

Provision uses tool advance_o0 (name: provision) with param service: service. It moves from down to provisioned. Precondition: service must be down. Good.

Configure uses advance_o1 (configure): from provisioned to configured. Precondition: service must be provisioned.

Deploy uses adva-nce_2 (deploy): from configured to deployed. Precondition: service must be configured.

Health-check uses adva-nce_3 (health-check): from deployed to healthy. Precondition: service must be deployed AND requires depth_flag_6 flag to be set AND requires the art_0 artifact to be published.

Thus before health-check we need:

- Depth flag 6 set (depth_flag_6 = true). This depends on chain of flags via other set_flag tools.

Let's examine flag dependencies:

Depth flags list: depth_flag_0 .. depth_flag_6? Actually they gave IDs: depth_flag_0 (feature_gate_on), depth_flag_1 (backup_taken?), wait reading: They listed Flags: flag_0 (maintenance_window_open), flag_1 (secrets_synced), depth_flag_0 (feature_gate_on), depth_flag_1 (backup_taken), depth_flag_2 (quota_raised), depth_flag_3 (maintenance_window_open), depth_flag_4 (secrets_synced), depth_flag_5 (feature_gate_on), depth_flag_6 (backup_taken).

So there are duplicate names but different depths.

Set_flag tools have specific requirements:

List them:

- set_depth_flag_o1: set_flag, sets depth_flag_1 to true. Precondition: it must currently be false. Requires the depth_flag_0 flag first.

- set_dep-th_flag_5: set_flag, sets depth_flag_5 to true. Precondition: false. Requires the depth_flag_4 flag first.

- set_dep_th_flag_0: set_flag, sets depth_flag_0 to true. Precondition: false. Requires the flag_0 flag first.

- set_depth_flag_o3: set_flag, sets depth_flag_3 to true. Precondition: false. Requires the depth_flag_2 flag first.

- set_flag_0: set_flag, sets flag_0 to true. Precondition: false.

- set_dep-th_flag_6: set_flag, sets depth_flag_6 to true. Precondition: false. Requires the depth_flag_5 flag first.

- set_dep_th_flag_2: set_flag, sets depth_flag_2 to true. Precondition: false. Requires the depth_flag_1 flag first.

- set_dep_th_flag_4: set_flag, sets depth_flag_4 to true. Precondition: false. Requires the depth_flag_3 flag first.

Also note some duplicates like set_dep-th_flag_5 etc.

Thus to get depth_flag_6 true, we need depth_flag_5 true first. To get depth_flag_5 true, need depth_flag_4 true. To get depth_flag_4 true, need depth_flag_3 true. To get depth_flag_3 true, need depth_flag_2 true. To get depth_flag_2 true, need depth_flag_1 true. To get depth_flag_1 true, need depth_flag_0 true. To get depth_flag_0 true, need flag_0 true.

Flag_0 can be set directly via set_flag_0 (no prereq). So chain: set_flag_0 -> set_dep_th_flag_0 (depth_flag_0) -> set_depth_flag_o1 (depth_flag_1) -> set_dep_th_flag_2 (depth_flag_2) -> set_depth_flag_o3 (depth_flag_3) -> set_dep_th_flag_4 (depth_flag_4) -> set_dep-th_flag_5 (depth_flag_5) -> set_dep-th_flag_6 (depth_flag_6).

Check each tool naming exactly as given:

- set_flag_0: id: set_flag_0 | name: set_flag | params: flag: flag

- set_dep_th_flag_0: id: set_dep_th_flag_0 | name: set_flag | params: flag: flag

- set_depth_flag_o1: id: set_depth_flag_o1 | name: set_flag | params: flag: flag

- set_dep_th_flag_2: id: set_dep_th_flag_2 | name: set_flag | params: flag: flag

- set_depth_flag_o3: id: set_depth_flag_o3 | name: set_flag | params: flag: flag

- set_dep_th_flag_4: id: set_dep_th_flag_4 | name: set_flag | params: flag: flag

- set_dep-th_flag_5: id: set_dep-th_flag_5 | name: set_flag | params: flag: flag

- set_dep-th_flag_6: id: set_dep-th_flag_6 | name: set_flag | params: flag: flag

Note hyphens vs underscores: careful.

Now also need art_0 artifact published. Steps: build_art_0 then publis_h_art_0.

Build_art_0: precondition artifact absent (currently absent). Publishes after built.

Publish_art_0: precondition artifact built.

Thus we need to run build_art_0 then publis_h_art_0.

Now overall plan:

1. Provision svc_0: advance_o0 (service: svc_0)
2. Configure svc_0: advance_o1 (service: svc_0)
3. Deploy svc_0: adva-nce_2 (service: svc_0)
   Wait: Need to ensure service is configured before deploy. Yes after step2.

But we might need to do flag chain and artifact building interleaved; they don't depend on service state except health-check needs depth_flag_6 and art_0 published. So we can do those before health-check.

Thus steps:

- set_flag_0 (flag_0)
- set_dep_th_flag_0 (depth_flag_0)
- set_depth_flag_o1 (depth_flag_1)
- set_dep_th_flag_2 (depth_flag_2)
- set_depth_flag_o3 (depth_flag_3)
- set_dep_th_flag_4 (depth_flag_4)
- set_dep-th_flag_5 (depth_flag_5)
- set_dep-th_flag_6 (depth_flag_6)

- build_art_0 (artifact: art_0)
- publis_h_art_0 (artifact: art_0)

Then health-check: adva-nce_3 (service: svc_0) which will move from deployed to healthy.

But we need to ensure service is deployed before health-check. So we should provision/configure/deploy before health-check. However health-check also requires depth_flag_6 and art_0 published, which we can have done earlier.

Thus ordering: we could do provision/configure/deploy early, then flags and artifact, then health-check. But health-check precondition: service must be deployed. If we do deploy early, then later we do flags and artifact, service stays deployed (no further changes). That's fine.

Thus final sequence:

1. advance_o0 (provision svc_0)
2. advance_o1 (configure svc_0)
3. adva-nce_2 (deploy svc_0)
4. set_flag_0
5. set_dep_th_flag_0
6. set_depth_flag_o1
7. set_dep_th_flag_2
8. set_depth_flag_o3
9. set_dep_th_flag_4
10. set_dep-th_flag_5
11. set_dep-th_flag_6
12. build_art_0
13. publis_h_art_0
14. adva-nce_3 (health-check svc_0)

That's 14 tool calls, within limit 28.

Need to verify each tool's precondition at moment of call.

Let's simulate:

Initial state:
- svc_0: down
- svc_1: down (irrelevant)
- art_0: absent
- art_1: absent
- flag_0: off (false)
- depth_flag_0..6: all off (false)
- maintenance_window_open flag (flag_0) off
- secrets_synced flag (flag_1) off
- feature_gate_on flag (depth_flag_0) off
- backup_taken flag (depth_flag_1) off
- quota_raised flag (depth_flag_2) off
- duplicate flags similarly off.

Step1: advance_o0 (provision svc_0). Precondition: service must be down. svc_0 down => ok. After: svc_0 provisioned.

Step2: advance_o1 (configure svc_0). Precondition: service must be provisioned. svc_0 provisioned => ok. After: configured.

Step3: adva-nce_2 (deploy svc_0). Precondition: service must be configured. svc_0 configured => ok. After: deployed.

Step4: set_flag_0 (flag_0). Precondition: flag_0 false. Currently off => ok. After: flag_0 true.

Step5: set_dep_th_flag_0 (depth_flag_0). Precondition: depth_flag_0 false AND requires flag_0 flag first. flag_0 now true => ok. After: depth_flag_0 true.

Step6: set_depth_flag_o1 (depth_flag_1). Precondition: depth_flag_1 false AND requires depth_flag_0 flag first. depth_flag_0 true => ok. After: depth_flag_1 true.

Step7: set_dep_th_flag_2 (depth_flag_2). Precondition: depth_flag_2 false AND requires depth_flag_1 flag first. depth_flag_1 true => ok. After: depth_flag_2 true.

Step8: set_depth_flag_o3 (depth_flag_3). Precondition: depth_flag_3 false AND requires depth_flag_2 flag first. depth_flag_2 true => ok. After: depth_flag_3 true.

Step9: set_dep_th_flag_4 (depth_flag_4). Precondition: depth_flag_4 false AND requires depth_flag_3 flag first. depth_flag_3 true => ok. After: depth_flag_4 true.

Step10: set_dep-th_flag_5 (depth_flag_5). Precondition: depth_flag_5 false AND requires depth_flag_4 flag first. depth_flag_4 true => ok. After: depth_flag_5 true.

Step11: set_dep-th_flag_6 (depth_flag_6). Precondition: depth_flag_6 false AND requires depth_flag_5 flag first. depth_flag_5 true => ok. After: depth_flag_6 true.

Step12: build_art_0 (artifact: art_0). Precondition: artifact absent. art_0 absent => ok. After: built.

Step13: publis_h_art_0 (artifact: art_0). Precondition: artifact built. art_0 built => ok. After: published.

Step14: adva-nce_3 (health-check svc_0). Precondition: service must be deployed. svc_0 deployed => ok. Requires depth_flag_6 flag to be set. depth_flag_6 true => ok. Requires the art_0 artifact to be published. art_0 published => ok. After: service moves to healthy.

Goal satisfied: svc_0 healthy.

All good.

Now output JSON array with objects {"tool": "<tool id>", "args": {"<param>": "<entity id>"}}.

Need to use exact entity ids: service: svc_0, artifact: art_0, flag: flag_0 etc.

For set_flag tools, param is "flag": flag entity id. Which flag entity? They have flags: flag_0, depth_flag_0, etc. Use those ids.

Thus:

- {"tool": "advance_o0", "args": {"service": "svc_0"}}
- {"tool": "advance_o1", "args": {"service": "svc_0"}}
- {"tool": "adva-nce_2", "args": {"service": "svc_0"}} (note hyphen)
- {"tool": "set_flag_0", "args": {"flag": "flag_0"}}
- {"tool": "set_dep_th_flag_0", "args": {"flag": "depth_flag_0"}}
- {"tool": "set_depth_flag_o1", "args": {"flag": "depth_flag_1"}}
- {"tool": "set_dep_th_flag_2", "args": {"flag": "depth_flag_2"}}
- {"tool": "set_depth_flag_o3", "args": {"flag": "depth_flag_3"}}
- {"tool": "set_dep_th_flag_4", "args": {"flag": "depth_flag_4"}}
- {"tool": "set_dep-th_flag_5", "args": {"flag": "depth_flag_5"}}
- {"tool": "set_dep-th_flag_6", "args": {"flag": "depth_flag_6"}}
- {"tool": "build_art_0", "args": {"artifact": "art_0"}}
- {"tool": "publis_h_art_0", "args": {"artifact": "art_0"}}
- {"tool": "adva-nce_3", "args": {"service": "svc_0"}}

Check spelling of tool IDs exactly as given:

List from catalog:

- advance_o0 (id: advance_o0)
- advance_o1 (id: advance_o1)
- adva-nce_2 (id: adva-nce_2) note hyphen between va and nce? Actually "adva-nce_2". Yes.
- adva-nce_3 (id: adva-nce_3)
- set_flag_0 (id: set_flag_0)
- set_dep_th_flag_0 (id: set_dep_th_flag_0)
- set_depth_flag_o1 (id: set_depth_flag_o1)
- set_dep_th_flag_2 (id: set_dep_th_flag_2)
- set_depth_flag_o3 (id: set_depth_flag_o3)
- set_dep_th_flag_4 (id: set_dep_th_flag_4)
- set_dep-th_flag_5 (id: set_dep-th_flag_5)
- set_dep-th_flag_6 (id: set_dep-th_flag_6)
- build_art_0 (id: build_art_0)
- publis_h_art_0 (id: publis_h_art_0)

Make sure to use exactly those strings.

Now produce JSON array.