Record 48c07ab5c7314814adfa94cd67b0d148

We need to produce a JSON array of tool calls that will achieve the goal: webhooks-0 must reach at least 'healthy' state, reporting-1 must reach at least 'configured' state.

Current state summary:

- reporting-1 was fully torn down and has not been touched since. So it's presumably 'down' (or maybe not provisioned). It hasn't been touched, so it's down.

- webhooks-0 is currently down (not yet provisioned). So it's down.

- notifier-2 is currently down (not yet provisioned). Not relevant.

- db-migration artifact does not exist yet. That's art_1.

- maintenance_window_open flag is off. That's flag_0.

- secrets_synced flag was never enabled after the last reset. That's flag_1.

- release-image artifact does not exist yet. That's art_0.

- The maintenance_window_open flag is off.

- The secrets_synced flag was never enabled after the last reset. So it's off.

- The release-image artifact does not exist yet.

- The db-migration artifact does not exist yet.

- The release-image artifact is art_0.

- The db-migration artifact is art_1.

- The interleave_window flag is flag_interleave_2, currently presumably off.

Goal: webhooks-0 must reach at least 'healthy' state. That means we need to provision it, configure it, deploy it, health-check it. The health-check requires flag_0 (maintenance_window_open) to be set, art_0 published, and flag_interleave_2 open. Also health-check moves from deployed to healthy.

Thus we need to:

1. Build the release-image artifact (art_0) -> built.

2. Publish the artifact (publish_artifact) -> published.

3. Provision webhooks-0 (svc_0) -> provisioned.

4. Configure webhooks-0? Actually configure is for moving from provisioned to configured. But for webhooks-0 we need to eventually deploy and health-check. The tool 'configure' is for moving from provisioned to configured. However we might not need to configure webhooks-0; maybe we need to deploy it directly? The deploy tool moves from configured to deployed. So we need to get to configured state first. That likely requires configure tool, which requires flag_interleave_2 open. So we need to open interleave window.

Thus steps for webhooks-0:

- Provision svc_0 (adva_nce_0) -> provisioned.

- Open interleave window (open_interleave_window) to allow configure and other steps.

- Configure svc_0 (adva_nce_1) -> configured. This requires flag_interleave_2 open (which we will have opened).

- Deploy svc_0 (adva_nce_2) -> deployed. This moves from configured to deployed.

- Health-check svc_0 (adva_nce_3) -> healthy. This requires flag_0 (maintenance_window_open) set, art_0 published, flag_interleave_2 open.

Thus we need to set flag_0 (maintenance_window_open) to true. That's set_flag_0.

Also need to build and publish art_0 (release-image). Build artifact (build_artifact) then publish_artifact.

Additionally, there may be other flags needed: secrets_synced (flag_1) maybe not needed for these goals. Not mentioned as required for health-check. Only flag_0, art_0 published, flag_interleave_2 open.

Goal also includes reporting-1 must reach at least 'configured' state. So we need to get svc_1 (reporting-1) to configured. That requires provisioning first, then configure. Provisioning is adva_nce_0 with service: svc_1. Then configure (adva_nce_1) with service: svc_1, which also requires flag_interleave_2 open (which we will open). So we can provision reporting-1, then configure it.

Thus overall plan:

We need to open interleave window early, because both configure steps require it. Also health-check requires it.

We also need to set flag_0 (maintenance_window_open) to true before health-check.

We need to build and publish art_0 before health-check.

Sequence:

1. build_artifact (artifact: art_0) -> moves from absent to built.

2. publish_artifact (artifact: art_0) -> moves from built to published.

3. set_flag_0 (flag: flag_0) -> set maintenance_window_open to true.

4. open_interleave_window () -> open flag_interleave_2.

Now we can proceed with provisioning and configuring services.

5. provision svc_0 (service: svc_0) -> provisioned.

6. provision svc_1 (service: svc_1) -> provisioned.

7. configure svc_0 (service: svc_0) -> configured. (requires flag_interleave_2 open, which we have)

8. configure svc_1 (service: svc_1) -> configured. (requires flag_interleave_2 open)

9. deploy svc_0 (service: svc_0) -> deployed.

10. health-check svc_0 (service: svc_0) -> healthy. (requires flag_0 true, art_0 published, flag_interleave_2 open)

We might also need to deploy svc_1? Not required; only need configured.

We must ensure we don't exceed 20 calls; we have about 10.

Check preconditions:

- build_artifact: requires artifact art_0 absent? It can be built if not built. No preconditions given besides artifact param.

- publish_artifact: requires artifact built. We'll have built it.

- set_flag_0: can be set while currently false. It's currently off, so okay.

- open_interleave_window: no preconditions.

- provision: can be called on a service that is down (not provisioned). Both svc_0 and svc_1 are down, so okay.

- configure: requires flag_interleave_2 open. We'll open it before configure calls.

- deploy: moves from configured to deployed. So we need to have configured first.

- health-check: requires flag_0 set, art_0 published, flag_interleave_2 open. We'll have all.

Thus order is fine.

Potential nuance: The health-check tool name is adva_nce_3, but the id is adva_nce_3? Actually tool catalog lists id: adva_nce_3 | name: health-check. So tool id is adva_nce_3.

Similarly, deploy tool id is adva_nce_2.

Configure tool id is adva_nce_1.

Provision tool id is adva_nce_0.

Publish artifact id is publish_art_o0.

Build artifact id is build_art_o0.

Set flag_0 id is set_flag_0.

Open interleave window id is open_interleave_window.

Thus we need to output JSON array of objects with "tool": "<tool id>", "args": {...}.

Make sure param names match tool definitions.

Let's list each tool with required parameters:

- build_art_o0: params: artifact: artifact. So args: {"artifact": "art_0"}.

- publish_art_o0: params: artifact: artifact. So args: {"artifact": "art_0"}.

- set_flag_0: params: flag: flag. So args: {"flag": "flag_0"}.

- open_interleave_window: no args. So args: {} (or just omit). Probably need empty object.

- adva_nce_0 (provision): params: service: service. So args: {"service": "svc_0"} etc.

- adva_nce_1 (configure): params: service: service.

- adva_nce_2 (deploy): params: service: service.

- adva_nce_3 (health-check): params: service: service.

Thus our plan array:

1. {"tool":"build_art_o0","args":{"artifact":"art_0"}}

2. {"tool":"publish_art_o0","args":{"artifact":"art_0"}}

3. {"tool":"set_flag_0","args":{"flag":"flag_0"}}

4. {"tool":"open_interleave_window","args":{}} (maybe just "args":{}

5. {"tool":"adva_nce_0","args":{"service":"svc_0"}}

6. {"tool":"adva_nce_0","args":{"service":"svc_1"}}

7. {"tool":"adva_nce_1","args":{"service":"svc_0"}}

8. {"tool":"adva_nce_1","args":{"service":"svc_1"}}

9. {"tool":"adva_nce_2","args":{"service":"svc_0"}}

10. {"tool":"adva_nce_3","args":{"service":"svc_0"}}

Check that we haven't missed any required steps for reporting-1 to reach configured: we provisioned and configured it, which moves it to configured. That's enough.

Now ensure that we didn't need to warm cache or audit logs etc. Not needed.

Check that we didn't need to set secrets_synced flag. Not required.

Check that health-check requires flag_interleave_2 open, which we opened earlier. Good.

Check that health-check also requires flag_0 set, which we set earlier. Good.

Check that health-check also requires art_0 published, which we published earlier. Good.

Thus the sequence satisfies all.

Now produce JSON array exactly, no extra text.

Make sure to use double quotes, no trailing commas.

Thus final answer:

[
  {"tool":"build_art_o0","args":{"artifact":"art_0"}},
  {"tool":"publish_art_o0","args":{"artifact":"art_0"}},
  {"tool":"set_flag_0","args":{"flag":"flag_0"}},
  {"tool":"open_interleave_window","args":{}},
  {"tool":"adva_nce_0","args":{"service":"svc_0"}},
  {"tool":"adva_nce_0","args":{"service":"svc_1"}},
  {"tool":"adva_nce_1","args":{"service":"svc_0"}},
  {"tool":"adva_nce_1","args":{"service":"svc_1"}},
  {"tool":"adva_nce_2","args":{"service":"svc_0"}},
  {"tool":"adva_nce_3","args":{"service":"svc_0"}}
]

Check that we used correct tool ids: build_art_o0, publish_art_o0, set_flag_0, open_interleave_window, adva_nce_0, adva_nce_1, adva_nce_2, adva_nce_3.

Yes.

Now output exactly that JSON array.