Record 41012817f9244c17927055ac83494eac

We need to produce a sequence of tool calls achieving:

Goal: scheduler-0 (svc_0) must reach at least deployed state. So we need to go through: down -> provisioned -> configured -> deployed.

Search-1 (svc_1) must reach at least configured state: so down -> provisioned -> configured.

Constraints: services can't skip rungs. Also artifacts: For deploying a service via `adva_nce_2` (deploy) requires flag_1 set, artifact art_0 published, and flag_interleave_3 open.

Configuring a service (`adva_nce_1`) requires flag_interleave_3 open.

Provisioning (`adva-nce_0`? Actually there is `adva-nce_0`: name: provision). No extra requirements? It doesn't list prerequisites besides being called on a service that is down.

Also note: There are other tools like `poiso-n_trap`, `decoy_o0`, `dec-oy_1`. They seem irrelevant but could be used if needed. But likely not required.

Flag dependencies: set_flag_o1 sets flag_1 true, requires flag_0 first. set_flag_0 sets flag_0 true (no requirement). So to get flag_1 we need to set flag_0 then set_flag_o1.

Interleaved window flag: We have a separate flag named flag_interleave_3 (interleave_window). To open it, we have tool `open_interleave_window` with no args. Likely sets that flag to true. Not sure about prerequisites. Probably none.

Thus overall plan:

1. set_flag_0 (flag_0)
2. set_flag_o1 (flag_1) // after flag_0 set
3. open_interleave_window (sets flag_interleave_3)
4. Build artifact art_0? Need to publish artifact art_0 for deploy. There's build_art_0 then publish_artifact. So:
5. build_art_0 (artifact art_0)
6. publis_h_art_0 (publish artifact art_0)
Now we have flag_1 true, artifact published, interleave window open.

Now we need to provision and configure both services, then deploy scheduler-0.

But note: configuring a service requires interleave window open (already true). Provisioning has no requirements.

So we can provision scheduler-0 and search-1 in any order, then configure them, then deploy scheduler-0.

Potential ordering constraints: After provisioning, we can configure. Must ensure we don't try to configure before provisioned.

Let's propose:

7. adva-nce_0 provision svc_0 (scheduler-0)
8. adva-nce_0 provision svc_1 (search-1)
9. adva_nce_1 configure svc_0
10. adva_nce_1 configure svc_1
Now both services are configured.

Then deploy scheduler-0:
11. adva_nce_2 deploy svc_0 (requires flag_1, artifact published, interleave window open) all satisfied.

Check counts: That's 11 tool calls (including set_flag_0, set_flag_o1, open_interleave_window, build_art_0, publis_h_art_0, provision svc0, provision svc1, configure svc0, configure svc1, deploy svc0). Wait count: Let's enumerate:

1 set_flag_0
2 set_flag_o1
3 open_interleave_window
4 build_art_0
5 publis_h_art_0
6 adva-nce_0 provision svc_0
7 adva-nce_0 provision svc_1
8 adva_nce_1 configure svc_0
9 adva_nce_1 configure svc_1
10 adva_nce_2 deploy svc_0

That's 10 calls exactly! Good.

Need to verify each tool's preconditions:

- set_flag_0: sets flag_0 true. Precondition? None mentioned. Should be allowed when flag_0 false (currently off). OK.

- set_flag_o1: sets flag_1 true, requires flag_0 flag first. After step1 flag_0 true, ok.

- open_interleave_window: opens flag_interleave_3. No preconditions listed. Assume allowed when flag off initially.

- build_art_0: builds artifact art_0 from absent to built. No preconditions.

- publis_h_art_0: publishes artifact art_0 from built to published. Requires artifact built. After step4 it's built, ok.

- adva-nce_0 provision svc_0: provisions service from down to provisioned. No preconditions. Service currently down.

- adva-nce_0 provision svc_1: same.

- adva_nce_1 configure svc_0: requires flag_interleave_3 window flag open. After step3 it's open. Also service must be provisioned (we just provisioned). OK.

- adva_nce_1 configure svc_1: same.

- adva_nce_2 deploy svc_0: requires flag_1 set (yes after step2), artifact art_0 published (yes after step5), flag_interleave_3 window open (yes after step3). Also service must be configured (we just configured). OK.

All good. Goal satisfied: scheduler-0 deployed, search-1 configured.

We used exactly 10 tool calls, within limit.

Now output JSON array as specified. Each element: {"tool": "<tool id>", "args": {"<param>": "<entity id>"}}.

Tool IDs exactly as given: set_flag_0, set_flag_o1, open_interleave_window, build_art_0, publis_h_art_0, adva-nce_0, adva_nce_1, adva_nce_2.

Note: The tool IDs have hyphens and underscores. Must match exactly.

List:

- set_flag_0
- set_flag_o1
- open_interleave_window
- build_art_0
- publis_h_art_0
- adva-nce_0
- adva_nce_1
- adva_nce_2

Args:

set_flag_0: {"flag": "flag_0"}? The param name is "flag". The entity id for flag_0 is flag_0.

Similarly set_flag_o1: {"flag": "flag_1"}

open_interleave_window: no args => {}.

build_art_0: {"artifact": "art_0"}

publis_h_art_0: {"artifact": "art_0"}

adva-nce_0: {"service": "svc_0"} then another for svc_1.

adva_nce_1: {"service": "svc_0"} then svc_1.

adva_nce_2: {"service": "svc_0"}

Make sure to use correct strings.

Now produce JSON array.