Record 1ea1329c705747a088c88945dfa65da2

We need to produce a sequence of tool calls leading to service reporting-0 being healthy. Starting state:

- services: both down (svc_0, svc_1) -> they are down (not provisioned)
- artifacts: none built/published
- flags: all off? Let's list given flags with IDs:

flag_0 = maintenance_window_open (off)
flag_1 = secrets_synced (off)
depth_flag_0 = feature_gate_on (off)
depth_flag_1 = backup_taken (off)
depth_flag_2 = quota_raised (off)
depth_flag_3 = maintenance_window_open (duplicate?) Actually there is also depth_flag_3 same as flag_0? It says duplicate but we treat them separate maybe. But initial states: all off.

Goal: service svc_0 must be at least healthy.

To get healthy, we need to run health-check tool (adva-nce_3) which moves service from deployed to healthy. Precondition: service must be currently deployed. Also requires depth_flag_6 flag to be set. And requires art_0 artifact to be published.

Thus steps needed:

1. Ensure svc_0 goes through provision, configure, deploy to become deployed.
   - Provision: advance_o0 (provision) moves from down to provisioned.
   - Configure: advance_o1 (configure) moves from provisioned to configured.
   - Deploy: adva-nce_2 (deploy) moves from configured to deployed.

But note: There are two identical names: advance_o0 and advance_o1 correspond to provision and configure respectively. We'll need those.

After deploying, we can then health-check if depth_flag_6 is set and art_0 published.

So we need to:

- Build artifact art_0: build_art_0 (build_artifact) from absent to built.
- Publish artifact art_0: publish_art_o0 (publish_artifact) from built to published.

Also need to set depth_flag_6 true via set_depth_flag_o6 (set_flag) requiring depth_flag_5 first.

Depth_flag chain: To set depth_flag_6 we need depth_flag_5 true. Depth_flag_5 requires depth_flag_4 true. Depth_flag_4 requires depth_flag_3 true. Depth_flag_3 requires depth_flag_2 true. Depth_flag_2 requires depth_flag_1 true. Depth_flag_1 requires depth_flag_0 true. Depth_flag_0 requires flag_0 true.

Thus we have a long dependency chain: flag_0 -> depth_flag_0 -> depth_flag_1 -> depth_flag_2 -> depth_flag_3 -> depth_flag_4 -> depth_flag_5 -> depth_flag_6.

All start false. So we need to set each sequentially using appropriate set_flag tools.

Let's map each set_flag tool ID to its target flag:

From catalog:

- set_flag_o0: sets flag_0 (maintenance_window_open). Precondition: flag_0 false. No other requirement.

- set_depth_flag_o0: sets depth_flag_0 (feature_gate_on). Precondition: depth_flag_0 false. Requires flag_0 first.

- set_depth_flag_o1: sets depth_flag_1 (backup_taken). Precondition: depth_flag_1 false. Requires depth_flag_0 first.

- set_dep-th_flag_2: sets depth_flag_2 (quota_raised). Precondition: depth_flag_2 false. Requires depth_flag_1 first.

- set_dep_th_flag_3: sets depth_flag_3 (maintenance_window_open). Precondition: depth_flag_3 false. Requires depth_flag_2 first.

- set_dep-th_flag_4: sets depth_flag_4 (secrets_synced). Precondition: depth_flag_4 false. Requires depth_flag_3 first.

- set_depth_flag_o5: sets depth_flag_5 (feature_gate_on). Precondition: depth_flag_5 false. Requires depth_flag_4 first.

- set_depth_flag_o6: sets depth_flag_6 (backup_taken). Precondition: depth_flag_6 false. Requires depth_flag_5 first.

Note naming weirdness but okay.

Thus we need to execute these eight set_flag calls in order.

Now after setting depth_flag_6, we can health-check.

Additionally, we need to ensure service path: provision, configure, deploy before health-check.

Provision uses advance_o0 (provision) param service: svc_0 (or could do svc_1 but we need svc_0). Configure uses advance_o1 similarly. Deploy uses adva-nce_2.

Health-check uses adva-nce_3.

Potentially we might also need to consider that after provisioning/configure/deploy we might want to also do something else like warm cache etc., but not needed.

Check preconditions: For provision, service must be down. Initially svc_0 down => ok.

For configure, service must be provisioned. After provision step, it will be provisioned.

For deploy, service must be configured. After configure step, it will be configured.

For health-check, service must be deployed. After deploy step, it will be deployed. Additionally require depth_flag_6 true and art_0 published.

Thus overall ordering:

Set flag chain (8 steps) -> Build artifact -> Publish artifact -> Provision svc_0 -> Configure svc_0 -> Deploy svc_0 -> Health-check svc_0.

Alternatively we could interleave building artifact earlier; doesn't matter as long as preconditions satisfied when called.

Need to check that building artifact precondition: artifact must be absent. Initially absent, so fine.

Publish artifact precondition: artifact must be built. So after build.

Now verify that we don't exceed 28 tool calls. We'll have 8 set flags + 2 artifact steps + 3 service steps + 1 health-check = 14 calls. Well within limit.

Now we need to output JSON array of objects with tool IDs and args.

Tool IDs exactly as given in catalog:

- set_flag_o0
- set_depth_flag_o0
- set_depth_flag_o1
- set_dep-th_flag_2
- set_dep_th_flag_3
- set_dep-th_flag_4
- set_depth_flag_o5
- set_depth_flag_o6
- build_art_0
- publish_art_o0
- advance_o0
- advance_o1
- adva-nce_2
- adva-nce_3

Make sure to copy hyphens and underscores exactly.

Now arguments:

For set_flag tools: param "flag": flag entity ID.

Which flag IDs?

- flag_0 corresponds to flag entity ID flag_0 (given)
- depth_flag_0 corresponds to depth_flag_0
- depth_flag_1 corresponds to depth_flag_1
- depth_flag_2 corresponds to depth_flag_2
- depth_flag_3 corresponds to depth_flag_3
- depth_flag_4 corresponds to depth_flag_4
- depth_flag_5 corresponds to depth_flag_5
- depth_flag_6 corresponds to depth_flag_6

Thus mapping.

Now for build_art_0: param "artifact": art_0

publish_art_o0: param "artifact": art_0

advance_o0: param "service": svc_0

advance_o1: param "service": svc_0

adva-nce_2: param "service": svc_0

adva-nce_3: param "service": svc_0

Now double-check that there aren't any other hidden preconditions like needing maintenance_window_open flag for something else? Not required for health-check besides depth_flag_6. However some set_flag tools may have additional requirements like requiring certain flags first, which we already chained.

Check each set_flag tool's precondition:

- set_flag_o0: flag_0 must be false initially true? It's false, ok.

- set_depth_flag_o0: requires flag_0 true. We'll have set flag_0 before.

- set_depth_flag_o1: requires depth_flag_0 true. We'll have set depth_flag_0 before.

- set_dep-th_flag_2: requires depth_flag_1 true. We'll have set depth_flag_1 before.

- set_dep_th_flag_3: requires depth_flag_2 true. We'll have set depth_flag_2 before.

- set_dep-th_flag_4: requires depth_flag_3 true. We'll have set depth_flag_3 before.

- set_depth_flag_o5: requires depth_flag_4 true. We'll have set depth_flag_4 before.

- set_depth_flag_o6: requires depth_flag_5 true. We'll have set depth_flag_5 before.

Thus correct order.

Now confirm that there are no duplicate flag IDs causing confusion: there is flag_0 and depth_flag_3 both named maintenance_window_open but they are separate flags; we just follow chain.

Now final step: health-check adva-nce_3 requires depth_flag_6 true and art_0 published. We'll have those.

Now produce JSON array.

Order:

[
 {"tool":"set_flag_o0","args":{"flag":"flag_0"}},
 {"tool":"set_depth_flag_o0","args":{"flag":"depth_flag_0"}},
 {"tool":"set_depth_flag_o1","args":{"flag":"depth_flag_1"}},
 {"tool":"set_dep-th_flag_2","args":{"flag":"depth_flag_2"}},
 {"tool":"set_dep_th_flag_3","args":{"flag":"depth_flag_3"}},
 {"tool":"set_dep-th_flag_4","args":{"flag":"depth_flag_4"}},
 {"tool":"set_depth_flag_o5","args":{"flag":"depth_flag_5"}},
 {"tool":"set_depth_flag_o6","args":{"flag":"depth_flag_6"}},
 {"tool":"build_art_0","args":{"artifact":"art_0"}},
 {"tool":"publish_art_o0","args":{"artifact":"art_0"}},
 {"tool":"advance_o0","args":{"service":"svc_0"}},
 {"tool":"advance_o1","args":{"service":"svc_0"}},
 {"tool":"adva-nce_2","args":{"service":"svc_0"}},
 {"tool":"adva-nce_3","args":{"service":"svc_0"}}
]

That's 14 entries.

Double-check spelling of tool IDs: In catalog we have:

- set_flag_o0
- set_depth_flag_o0
- set_depth_flag_o1
- set_dep-th_flag_2
- set_dep_th_flag_3
- set_dep-th_flag_4
- set_depth_flag_o5
- set_depth_flag_o6
- build_art_0
- publish_art_o0
- advance_o0
- advance_o1
- adva-nce_2
- adva-nce_3

Yes.

Now ensure no extra spaces or newlines. Output only JSON array.