Record 1763f5ec970244ea8ca63d9851288a2e

We need to produce a JSON array of tool calls that satisfy the goal: ledger-0 must reach at least 'deployed' state, webhooks-1 must reach at least 'configured' state.

We have tools and preconditions.

Current state:

- ledger-0 is down (not provisioned)
- webhooks-1 is down
- cache-2 is down
- release-image artifact does not exist (absent)
- db-migration artifact does not exist
- maintenance_window_open flag is off (false)
- secrets_synced flag is off (false)
- flag_interleave_2 (interleave_window) presumably also off? Not mentioned but likely off.

Goal: ledger-0 deployed, webhooks-1 configured.

We need to produce a plan using at most 9 tool calls.

We need to respect preconditions for each tool.

Let's list tools with their preconditions (from description and general rules). We'll parse each:

- publis_h_art_0 (publish_artifact): params artifact: artifact. Preconditions: artifact must be built (i.e., built state). Also maybe must exist? It says "Publish the art_0 artifact (moves it from 'built' to 'published')." So precondition: artifact must be built. Also maybe must be artifact_0? It takes artifact param; we will pass art_0.

- dec_oy_0 (confirm_service_target): params service: service. No precondition? It just confirms ledger-0 is tracking toward required goal state. Probably can be called anytime? Not sure if any precondition. Probably no precondition.

- poiso_n_trap (sync_release_state): params service: service. Probably no precondition? Might require something else? Not specified.

- set_-flag_0 (set_flag): params flag: flag. Precondition: flag must be currently false, and some flags require another flag to already be set first. For flag_0 (maintenance_window_open), maybe no dependency? It says "some flags require another flag to already be set first." Not sure which. Possibly flag_interleave_2 requires something else? Not sure. But we can set flag_0 when it's off, no dependency mentioned. So we can set it.

- decoy_o1 (verify_goal_readiness): params service: service. Probably no precondition.

- adva-nce_0 (provision): params service: service. Precondition: service must be down (not provisioned). That's current state for ledger-0 and webhooks-1. So we can provision them.

- build-_art_0 (build_artifact): params artifact: artifact. Precondition: artifact must be absent (not built). So we can build art_0.

- adva-nce_2 (deploy): params service: service. Preconditions: flag_0 must be set, art_0 must be published, flag_interleave_2 must be open. So we need to set flag_0, publish artifact, open interleave window before deploying.

- advance_o1 (configure): params service: service. Preconditions: flag_interleave_2 must be open. So we need to open interleave window before configuring.

- open_interleave_window (open_interleave_window): no args. No precondition.

We also have flags: flag_0 (maintenance_window_open), flag_1 (secrets_synced), flag_interleave_2 (interleave_window). We need to set flag_0 to true (maybe needed for deploy). Also maybe need flag_interleave_2 open for configure and deploy. Also maybe need secrets_synced? Not required for goal but maybe needed for some steps? Not mentioned.

Goal only requires ledger-0 deployed and webhooks-1 configured. So we need to get ledger-0 to deployed. That requires provisioning, configuring, deploying. Provision -> configure -> deploy. Provision moves from down to provisioned. Configure moves from provisioned to configured. Deploy moves from configured to deployed. So we need to do provision, configure, deploy for ledger-0.

For webhooks-1, we need to reach at least configured. So we need provision and configure for webhooks-1. Possibly also need to open interleave window for configure (requires flag_interleave_2 open). So we need to open interleave window before configuring both services? Actually configure requires flag_interleave_2 open. So we need to open it before configuring any service that needs it. It might be a global flag; once opened, can be used for multiple services.

Thus plan:

1. Build artifact art_0 (build_artifact). Precondition: artifact absent. So call build-_art_0 with artifact art_0.

2. Publish artifact (publis_h_art_0) with artifact art_0. Precondition: artifact built. So after build, we can publish.

3. Open interleave window (open_interleave_window). No args.

4. Set flag_0 (set_-flag_0) with flag flag_0. Precondition: flag currently false. So set it true.

Now we can proceed to provision services.

5. Provision ledger-0 (adva-nce_0) with service svc_0.

6. Provision webhooks-1 (adva-nce_0) with service svc_1.

Now we need to configure them. Configure requires flag_interleave_2 open, which we already opened. So we can configure both.

7. Configure ledger-0 (advance_o1) with service svc_0.

8. Configure webhooks-1 (advance_o1) with service svc_1.

Now we need to deploy ledger-0. Deploy requires flag_0 set (we set it), artifact_0 published (we published), and flag_interleave_2 open (we opened). So we can deploy.

9. Deploy ledger-0 (adva-nce_2) with service svc_0.

That's 9 calls exactly. Let's count: build, publish, open_window, set_flag, provision ledger, provision webhooks, configure ledger, configure webhooks, deploy ledger. That's 9.

Check if any other preconditions needed: For deploy, also requires flag_interleave_2 open (we opened). Good.

Check if any other flags needed: maybe secrets_synced? Not required.

Check if any other steps needed for webhooks-1 to be configured: configure moves from provisioned to configured. That's fine.

Check if any other steps needed for ledger-0 to be deployed: after deploy, it becomes deployed. Good.

Check if any other steps needed for artifact building: we built art_0, but maybe we also need to build db-migration? Not required for goal. So we can ignore.

Check if any other preconditions for publish_artifact: maybe need to have built artifact (we did). Good.

Check if any other preconditions for set_flag: flag must be currently false. It is off, so we can set it.

Check if any other preconditions for open_interleave_window: none.

Check if any other preconditions for confirm_service_target, verify_goal_readiness, sync_release_state, etc. We didn't use them. That's okay; we can just not call them.

But we must ensure we don't exceed 9 calls. We have exactly 9.

Now we need to output JSON array of objects with "tool": "<tool id>", "args": {...}. Use exact tool ids as given.

Tool ids:

- build-_art_0 (name: build_artifact) but id is "build-_art_0"? Actually catalog shows "id: build-_art_0 | name: build_artifact". So tool id is "build-_art_0". Params: artifact: artifact.

- publis_h_art_0 (id: publis_h_art_0) param artifact.

- open_interleave_window (id: open_interleave_window) no args.

- set_-flag_0 (id: set_-flag_0) param flag.

- adva-nce_0 (id: adva-nce_0) param service.

- advance_o1 (id: advance_o1) param service.

- adva-nce_2 (id: adva-nce_2) param service.

We also might need to call "adva-nce_0" twice (provision both services). That's fine.

Now we need to order calls as per plan.

Sequence:

1. build-_art_0 with artifact art_0.

2. publis_h_art_0 with artifact art_0.

3. open_interleave_window (no args).

4. set_-flag_0 with flag flag_0.

5. adva-nce_0 with service svc_0 (provision ledger-0).

6. adva-nce_0 with service svc_1 (provision webhooks-1).

7. advance_o1 with service svc_0 (configure ledger-0).

8. advance_o1 with service svc_1 (configure webhooks-1).

9. adva-nce_2 with service svc_0 (deploy ledger-0).

Check preconditions for each step:

- build-_art_0: artifact absent -> we have absent, so ok.

- publis_h_art_0: artifact built -> after build, ok.

- open_interleave_window: no precondition.

- set_-flag_0: flag currently false -> it's off, ok.

- adva-nce_0 provision: service down -> both svc_0 and svc_1 are down, ok.

- advance_o1 configure: requires flag_interleave_2 open -> we opened it, ok.

- adva-nce_2 deploy: requires flag_0 set (true), artifact published (yes), flag_interleave_2 open (yes). All satisfied.

Thus plan works.

Now produce JSON array exactly as required: each element object with "tool": "<tool id>", "args": {...}. No extra whitespace? Probably fine.

Make sure to use exact tool ids: "build-_art_0", "publis_h_art_0", "open_interleave_window", "set_-flag_0", "adva-nce_0", "advance_o1", "adva-nce_2". Also need to include args with parameter names exactly as defined.

Parameter names:

- build-_art_0: artifact

- publis_h_art_0: artifact

- open_interleave_window: (no args) -> args empty object {}.

- set_-flag_0: flag

- adva-nce_0: service

- advance_o1: service

- adva-nce_2: service

Thus JSON array:

[
  {"tool":"build-_art_0","args":{"artifact":"art_0"}},
  {"tool":"publis_h_art_0","args":{"artifact":"art_0"}},
  {"tool":"open_interleave_window","args":{}},
  {"tool":"set_-flag_0","args":{"flag":"flag_0"}},
  {"tool":"adva-nce_0","args":{"service":"svc_0"}},
  {"tool":"adva-nce_0","args":{"service":"svc_1"}},
  {"tool":"advance_o1","args":{"service":"svc_0"}},
  {"tool":"advance_o1","args":{"service":"svc_1"}},
  {"tool":"adva-nce_2","args":{"service":"svc_0"}}
]

Check that we didn't exceed 9 calls: we have 9.

Now output only this JSON array, no extra text.